|
|
|
National Stock Number:
4730-01-503-0937
Federal Supply Class:
4730
National Item Identification Number:
015030937
Description:
FLANGE,PIPE
Detail:
An item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
|
Manufacturer Information:
| 16 110162 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | J518 | 0U583 | SAE INTERNATIONAL | | J518 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | J518 16 110162 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | SAE J518 16 110162 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | MS52525/16-32 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | SAE J518-2 16 110162C | 0U583 | SAE INTERNATIONAL | | SAE-J518-2 | 0U583 | SAE INTERNATIONAL | | SAE J518-2 16 110162C | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC |
|
Techincal Specification:
| BOLT HOLE DIAMETER | 0.531 INCHES NOMINAL | | BOLT HOLE QUANTITY | 4 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 3.062 INCHES NOMINAL | | FACE SEATING SURFACE CONDITION | MACHINED | | FEATURES PROVIDED | O RING | | FLANGE LENGTH | 3.940 INCHES MINIMUM AND 4.060 INCHES MAXIMUM | | FLANGE DIAMETER | 2.000 INCHES NOMINAL | | FLANGE SECTION STYLE | RAISED FACED, DISHED | | FLANGE WIDTH | 3.720 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.810 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-DTL-52525E MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL OR IRON | | MAXIMUM OPERATING PRESSURE AND MEDIA FOR WHICH DESIGNED | 3000.0 POUNDS PER SQUARE INCH FUEL/OIL, HYDROCARBON | | NECK HEIGHT | 0.293 INCHES NOMINAL | | NONDEFINITIVE SPEC/STD DATA | 4 FIGURE | | REDUCER FLANGE HOLE TYPE | CONCENTRIC | | RECESS DEPTH | 0.355 INCHES NOMINAL | | RECESS DIAMETER | 2.844 INCHES NOMINAL | | SPECIFICATION/STANDARD DATA | 81349-MIL-DTL-52525/16C GOVERNMENT SPECIFICATION AND 81343-J518 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD | | STYLE DESIGNATOR | BOLT HOLE CONNECTOR PLATE | | THICKNESS | 1.030 INCHES NOMINAL |
|
|