|
|
|
National Stock Number:
4730-01-503-2597
Federal Supply Class:
4730
National Item Identification Number:
015032597
Description:
ELBOW,TUBE TO BOSS
Detail:
A fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
|
Manufacturer Information:
| 32-38 070320 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | J514 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | J514 32-38 070320 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | MIL-DTL-18866 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-F-18866 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS51528B | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS51528B32 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| FURNISHED ITEMS AND QUANTITY | 1 TUBE COUPLING NUT AND 1 LOCKNUT | | FLOW ANGLE | 45.0 DEGREES | | LEG LENGTH | 1.860 INCHES NOMINAL 2ND END | | LEG LENGTH | 2.220 INCHES NOMINAL 1ST END | | MATERIAL | STEEL OVERALL | | MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 2.000 INCHES 1ST END | | NOMINAL THREAD SIZE | 2.500 INCHES ALL ENDS | | SEAT ANGLE | 37.0 DEGREES 1ST END | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 2A ALL ENDS | | THREAD SERIES DESIGNATOR | UN ALL ENDS | | THREAD QUANTITY PER INCH | 12 ALL ENDS |
|
|