| BODY STYLE | PLAIN |
| CONCENTRIC HOLE DEPTH | 1.620 INCHES NOMINAL |
| CONCENTRIC HOLE DIAMETER | 0.123 INCHES MINIMUM AND 0.128 INCHES MAXIMUM |
| COTTER PIN HOLE DIAMETER | 0.139 INCHES MINIMUM AND 0.144 INCHES MAXIMUM |
| DISTANCE FROM BOLT END TO HOLE CENTER | 0.312 INCHES NOMINAL |
| DISTANCE FROM FIRST RADIAL HOLE CENTER TO END OF BOLT | 1.818 INCHES NOMINAL |
| FIRST DIAMETER FROM WRENCHING FEATURE | 1.998 INCHES MINIMUM AND 2.000 INCHES MAXIMUM |
| FIRST END CONNECTION TYPE | THREADED INTERNAL PIPE |
| FIRST RADIAL FLUID HOLE DIAMETER | 0.123 INCHES MINIMUM AND 0.128 INCHES MAXIMUM |
| HEAD DIAMETER | 2.690 INCHES MINIMUM AND 2.810 INCHES MAXIMUM |
| LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO BOLT END | 3.260 INCHES NOMINAL |
| LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIRST DIAMETER | 3.260 INCHES NOMINAL |
| OVERALL LENGTH | 3.380 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM B443 GRADE 1 ANNEALED (INCONEL 625) ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | NICKEL ALLOY |
| SECOND END NOMINAL THREAD SIZE | 0.125 INCHES |
| SECOND END STYLE DESIGNATOR | PLAIN |
| SECOND END THREAD LENGTH | 0.187 INCHES NOMINAL |
| SECOND END THREAD DIRECTION | RIGHT-HAND |
| SECOND END THREAD SERIES DESIGNATOR | NPT |
| SPECIAL FEATURES | NEXT HIGHER ASSEMBLY 6395168. PROVISION FOR GREASE FITTING AT HEAD. PROVISION FOR COTTER PIN,SPLIT MS 24665-413 (CAGE:80205). PROVIDED WITH THREE RADIAL HOLES, 120 DEGREES APART FOR LUBRICATION. PROVIDED WITH 0.125 WIDE X 0.150 DEEP GROOVE AT HEAD ON CIRCUMFERENCE |
| WRENCHING FEATURE HEIGHT | 0.120 INCHES NOMINAL |
| WRENCHING FEATURE STYLE | ROUND |