| BOLT HOLE DIAMETER | 0.205 INCHES NOMINAL |
| BOLT HOLE QUANTITY | 4 |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.160 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.160 INCHES NOMINAL |
| FACE SEATING SURFACE CONDITION | GROUND |
| FLANGE LENGTH | 1.590 INCHES NOMINAL |
| FLANGE SECTION STYLE | PLAIN RECESSED FACE |
| FLANGE WIDTH | 1.590 INCHES NOMINAL |
| OUTER BOLT CIRCLE HOLE QUANTITY | 4 |
| OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.215 INCHES NOMINAL |
| OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.215 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | BAMS4133 ASSN STD 1ST MATERIAL RESPONSE AND AMS5645 ASSN STD 2ND MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY AND STEEL CORROSION RESISTING |
| MAXIMUM OPERATING PRESSURE AND MEDIA FOR WHICH DESIGNED | 1500.0 POUNDS PER SQUARE INCH ANY ACCEPTABLE |
| MAXIMUM OPERATING TEMP AND MEDIA FOR WHICH DESIGNED | 135.0 CELSIUS ANY ACCEPTABLE |
| NOMINAL PIPE SIZE FOR WHICH DESIGNED | 1.125 INCHES |
| RECESS DIAMETER | 1.260 INCHES NOMINAL |
| RECESS DEPTH | 0.115 INCHES NOMINAL |
| STYLE DESIGNATOR | RECTANGULAR, WITH BOLT HOLES |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-33 FED SPEC 1ST TREATMENT RESPONSE |
| SURFACE TREATMENT | PASSIVATE |
| THICKNESS | 0.230 INCHES NOMINAL |