| FIRST END THREAD CLASS | 2A |
| FIRST END THREAD LENGTH | 0.320 INCHES MINIMUM AND 0.360 INCHES MAXIMUM |
| FIRST END THREAD SERIES DESIGNATOR | UNF |
| FIRST END THREAD QUANTITY PER INCH | 24 |
| FIRST END SEAT ANGLE | 60.00 DEGREES NOMINAL |
| FIRST END STYLE DESIGNATOR | INVERTED FLARE |
| FIRST RADIAL FLUID HOLE DIAMETER | 0.046 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | BS NATIONAL SPEC SINGLE MATERIAL RESPONSE OR BS NATIONAL SPEC SINGLE MATERIAL RESPONSE OR BS S130 NATIONAL SPEC SINGLE MATERIAL RESPONSE |
| III MATERIAL | STEEL |
| MINIMUM TENSILE STRENGTH | 78400 POUNDS PER SQUARE INCH |
| OVERALL LENGTH | 1.670 INCHES MINIMUM AND 1.730 INCHES MAXIMUM |
| SECOND END CONNECTION TYPE | THREADED EXTERNAL TUBE |
| SECOND END NOMINAL THREAD SIZE | 0.383 INCHES |
| SECOND END STYLE DESIGNATOR | INVERTED FLARE |
| SECOND END THREAD CLASS | MEDIUM |
| SECOND END THREAD DIRECTION | RIGHT-HAND |
| SECOND END THREAD QUANTITY PER INCH | 28 |
| SECOND END THREAD SERIES DESIGNATOR | BSP.F |
| SECOND RADIAL FLUID HOLE DIAMETER | 0.156 INCHES NOMINAL |
| SPECIAL FEATURES | SKETCH STYLE CANNOT BE CONVERTED;1.060 IN. MAX & 1.040 IN. MIN LG FROM BEARING SURFACE UNDER HEAD TO END OF BOLT;O.900 IN. MAX & 0.810 IN. MIN LG FROM BOLT END TO SHOULDER;LONGITUDINAL HOLE 0.187 IN. DIA;0.062 IN. DIA HOLES ACROSS 2 CORNERS OF HEXAGON FOR LOCKING WIRE;0.383 IN. FLARED END CONNECTION TUBE |
| WIDTH ACROSS FLATS | 0.616 INCHES MINIMUM AND 0.627 INCHES MAXIMUM |
| WRENCHING FEATURE HEIGHT | 0.150 INCHES MINIMUM AND 0.170 INCHES MAXIMUM |
| WRENCHING FEATURE STYLE | HEXAGON |
| DISTANCE FROM FIRST RADIAL HOLE CENTER TO END OF BOLT | 0.340 INCHES MINIMUM AND 0.365 INCHES MAXIMUM |
| DISTANCE FROM SECOND RADIAL HOLE CENTER TO END OF BOLT | 0.730 INCHES NOMINAL |
| FIRST DIAMETER FROM WRENCHING FEATURE | 0.372 INCHES MINIMUM AND 0.374 INCHES MAXIMUM |
| FIRST END CONNECTION TYPE | THREADED EXTERNAL TUBE |
| FIRST END NOMINAL THREAD SIZE | 0.375 INCHES |
| FIRST END THREAD DIRECTION | RIGHT-HAND |