|
|
|
National Stock Number:
4810-00-513-4908
Federal Supply Class:
4810
National Item Identification Number:
005134908
Description:
VALVE,SOLENOID
Detail:
A valve having two or more ports with valve stem or pilot needle in a normally open or closed position. It is specifically designed to stop or start or change the flow of fluid by means of the magnetic action of an electric coil on a moveable core or plunger. The valve may be equipped with a manual opening or closing device. For items with three or more ports that utilize a reciprocating slide with recess areas which mate with ports in an integral or replaceable ported sleeve, see VALVE (1), LINEAR, DIRECTIONAL CONTROL. It may be inline or cartridge (manifold) design. Excludes VALVE (1), BUTTERFLY.
|
Manufacturer Information:
| 26610-2 | 81982 | HYDRO-AIRE AEROSPACE CORP |
|
Techincal Specification:
| MATERIAL | ALUMINUM ALLOY 2024 BODY | | STEEL CORROSION RESISTING FLOW CONTROL DEVICE | | STEEL SEAT | | STYLE DESIGNATOR | ANGLE | | FLOW CONTROL DEVICE | POPPET | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE | | MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | VALVE OPERATION METHOD | SOLENOID | | VOLTAGE IN VOLTS AND CURRENT TYPE | 18.0 DC AND | | 30.0 DC | | CURRENT RATING IN AMPS | 0.500 | | FLOW CONTROL DEVICE NORMAL OPERATION POSITION | OPEN | | INLET/OUTLET OPERATING PRESSURE DIFFERENTIAL | 40.0 POUNDS PER SQUARE INCH NOMINAL | | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END | | CONNECTION STYLE | PLAIN,OPTIONAL END(PIPE) 1ST END | | SEAT ANGLE | 60.0 DEGREES 1ST END | | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.375 INCHES 1ST END | | THREAD SERIES DESIGNATOR | UNF 1ST END | | NOMINAL THREAD SIZE | 0.562 INCHES 1ST END | | THREAD QUANTITY PER INCH | 18 1ST END | | THREAD CLASS | 3B 1ST END | | THREAD DIRECTION | RIGHT-HAND 1ST END | | SPECIAL FEATURES | 3 MTG HOLES 0.205 IN. ID | | TEST DATA DOCUMENT | 00502-HT26610 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 81982 | | DESIGN CONTROL REFERENCE | 26610-2 |
|
|