| APERTURE DIAMETER | 0.172 INCHES NOMINAL |
| CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END |
| CONNECTION TYPE | THREADED INTERNAL BOSS 2ND END |
| CONNECTION STYLE | FLARED (TUBE) 1ST END |
| CONNECTION STYLE | GASKET SEAL(BOSS) 2ND END |
| FLOW CONTROL DEVICE NORMAL OPERATION POSITION | CLOSED |
| FLOW CONTROL DEVICE | PISTON |
| MATERIAL | STEEL BODY |
| MATERIAL | STEEL CORROSION RESISTING FLOW CONTROL DEVICE |
| MAXIMUM OPERATING TEMP | 165.0 FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MOUNTING POSITION | HORIZONTAL OR VERTICAL |
| NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.250 INCHES 2ND END |
| NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.250 INCHES 1ST END |
| NOMINAL THREAD SIZE | 0.437 INCHES 1ST END |
| NOMINAL THREAD SIZE | 0.438 INCHES 2ND END |
| RENEWABLE SEAT RING TYPE | PRESSED-IN |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| THREAD CLASS | 3A 1ST END |
| THREAD CLASS | 3B 2ND END |
| THREAD SERIES DESIGNATOR | UNF 2ND END |
| THREAD SERIES DESIGNATOR | UNF 1ST END |
| THREAD QUANTITY PER INCH | 20 2ND END |
| VALVE OPERATION METHOD | SOLENOID |
| VOLTAGE IN VOLTS AND CURRENT TYPE | 22.0 DC AND 35.0 DC |