|
|
|
National Stock Number:
4810-00-824-1396
Federal Supply Class:
4810
National Item Identification Number:
008241396
Description:
VALVE,SOLENOID
Detail:
A valve having two or more ports with valve stem or pilot needle in a normally open or closed position. It is specifically designed to stop or start or change the flow of fluid by means of the magnetic action of an electric coil on a moveable core or plunger. The valve may be equipped with a manual opening or closing device. For items with three or more ports that utilize a reciprocating slide with recess areas which mate with ports in an integral or replaceable ported sleeve, see VALVE (1), LINEAR, DIRECTIONAL CONTROL. It may be inline or cartridge (manifold) design. Excludes VALVE (1), BUTTERFLY.
|
Manufacturer Information:
| 215-22337-1 | 80378 | TRIUMPH AEROSTRUCTURES, LLC | | 7U7400 | 60029 | WOODWARD HRT, INC. |
|
Techincal Specification:
| APERTURE DIAMETER | 0.187 INCHES NOMINAL | | CONNECTION TYPE | THREADED INTERNAL BOSS 1ST END | | CONNECTION STYLE | GASKET SEAL(BOSS) 1ST END | | CURRENT RATING IN AMPS | 1.200 | | FLOW CONTROL DEVICE NORMAL OPERATION POSITION | OPEN | | INLET/OUTLET OPERATING PRESSURE DIFFERENTIAL | 50.0 POUNDS PER SQUARE INCH NOMINAL | | PROPRIETARY CHARACTERISTICS | PACS | | MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID, PETROLEUM BASE SINGLE RESPONSE | | MOUNTING POSITION | HORIZONTAL OR VERTICAL | | NOMINAL THREAD SIZE | 0.437 INCHES 1ST END | | OFFSET DISTANCE | 0.540 INCHES | | SPECIAL FEATURES | 1.2 GPM DISCHARGE FLOW RATE | | VALVE OPERATION METHOD | SOLENOID | | VOLTAGE IN VOLTS AND CURRENT TYPE | 28.0 DC | | STYLE DESIGNATOR | STRAIGHT THRU W/OFFSET | | TEST DATA DOCUMENT | 80378-205-15-2049 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | THREAD CLASS | 3B 1ST END | | THREAD DIRECTION | RIGHT-HAND 1ST END | | THREAD QUANTITY PER INCH | 20 1ST END | | THREAD SERIES DESIGNATOR | UNF 1ST END |
|
|