|
|
|
National Stock Number:
4810-01-047-1241
Federal Supply Class:
4810
National Item Identification Number:
010471241
Description:
DIAPHRAGM,ACTUATOR VALVE,SPECIAL
Detail:
An item constructed of one or more layers of thin flexible material, either laminated or separated, designed to form a tight seal between the chambers of a valve, and to transmit pressure inducted motion to a valve disk either directly or through a mechanical linkage. The surface of the item must be formed or molded to have a beaded or rolled edge, ribs or any other raised surfaces. The item may contain bolt holes and/or center holes. Excludes DIAPHRA GM, VALVE, FLAT and GASKET.
|
Manufacturer Information:
| 119340-2 | 59364 | HONEYWELL INTERNATIONAL INC. | | 119340-2 | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 12 | | BOLT CIRCLE DIAMETER | 4.812 INCHES NOMINAL | | CENTER HOLE DIAMETER | 1.850 INCHES MINIMUM AND 1.880 INCHES MAXIMUM | | HOLE DIAMETER | 0.170 INCHES MINIMUM AND 0.190 INCHES MAXIMUM | | OUTSIDE DIAMETER | 4.780 INCHES MINIMUM AND 4.840 INCHES MAXIMUM | | OVERALL HEIGHT | 0.970 INCHES MINIMUM AND 0.990 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.020 INCHES MINIMUM AND 0.028 INCHES MAXIMUM | | MATERIAL | PLASTIC | | MEDIA FOR WHICH DESIGNED | AIR | | PRESSURE RATING | 50.0 POUNDS PER SQUARE INCH NOMINAL | | SPECIAL FEATURES | WITH SIX 0.120 MIN 0.140 MAX IN. DIA HOLES,EQUALLY SPACED,ON A 2.250 IN. DIA BOLT CIRCLE AROUND THE CENTER HOLE; MATERIAL: DACRON FABRIC AND ELASTOMER | | STYLE DESIGNATOR | SPECIAL SHAPED | | TAPER MAJOR DIAMETER | 4.190 INCHES MINIMUM AND 4.210 INCHES MAXIMUM | | TAPER MINOR DIAMETER | 2.790 INCHES MINIMUM AND 2.810 INCHES MAXIMUM | | TEMP RATING | -65.0 FAHRENHEIT MINIMUM AND 375.0 FAHRENHEIT MAXIMUM |
|
|