|
|
|
National Stock Number:
4810-01-121-6552
Federal Supply Class:
4810
National Item Identification Number:
011216552
Description:
VALVE,SOLENOID
Detail:
A valve having two or more ports with valve stem or pilot needle in a normally open or closed position. It is specifically designed to stop or start or change the flow of fluid by means of the magnetic action of an electric coil on a moveable core or plunger. The valve may be equipped with a manual opening or closing device. For items with three or more ports that utilize a reciprocating slide with recess areas which mate with ports in an integral or replaceable ported sleeve, see VALVE (1), LINEAR, DIRECTIONAL CONTROL. It may be inline or cartridge (manifold) design. Excludes VALVE (1), BUTTERFLY.
|
Manufacturer Information:
| 14049 | 16780 | EATON AEROSPACE LLC | | 14049-1 | 16780 | EATON AEROSPACE LLC | | 16VH310-1 | 81755 | LOCKHEED MARTIN CORPORATION | | 4810PL1626720 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH |
|
Techincal Specification:
| MATERIAL | ALUMINUM ALLOY 2024 BODY | | STEEL COMP 630 FLOW CONTROL DEVICE | | STEEL COMP 440A SEAT | | FLOW CONTROL DEVICE | POPPET | | MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID, MINERAL BASE SINGLE RESPONSE | | MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | MAXIMUM OPERATING TEMP | 275.0 DEG FAHRENHEIT SINGLE RESPONSE | | VALVE OPERATION METHOD | SOLENOID | | VOLTAGE IN VOLTS AND CURRENT TYPE | 28.0 DC | | CONNECTION TYPE | THREADED INTERNAL BOSS 1ST END | | CONNECTION STYLE | GASKET SEAL(BOSS) 1ST END | | THREAD SERIES DESIGNATOR | UNJF 1ST END | | NOMINAL THREAD SIZE | 0.250 INCHES 1ST END | | THREAD CLASS | 3B 1ST END | | THREAD DIRECTION | RIGHT-HAND 1ST END | | MOUNTING POSITION | VERTICAL | | RENEWABLE SEAT RING TYPE | PRESSED-IN | | SPECIAL FEATURES | ACFT TYPE F16A/B | | TEST DATA DOCUMENT | 16780-ATP-14049 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 81755 | | DESIGN CONTROL REFERENCE | 16VH310-1 |
|
|