|
|
|
National Stock Number:
4810-01-168-8684
Federal Supply Class:
4810
National Item Identification Number:
011688684
Description:
VALVE,SOLENOID
Detail:
A valve having two or more ports with valve stem or pilot needle in a normally open or closed position. It is specifically designed to stop or start or change the flow of fluid by means of the magnetic action of an electric coil on a moveable core or plunger. The valve may be equipped with a manual opening or closing device. For items with three or more ports that utilize a reciprocating slide with recess areas which mate with ports in an integral or replaceable ported sleeve, see VALVE (1), LINEAR, DIRECTIONAL CONTROL. It may be inline or cartridge (manifold) design. Excludes VALVE (1), BUTTERFLY.
|
Manufacturer Information:
| 3797-1-000 | 14923 | ACC PARTNERS INC | | 3797-1-000 | 1DRT7 | CIRCOR AEROSPACE INC | | 4810PL0654243 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 585R559 | 97942 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 585R559H01 | 97942 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END | | CONNECTION TYPE | THREADED INTERNAL PIPE 2ND END | | CONNECTION STYLE | FLARED (TUBE) 1ST END | | CONNECTION STYLE | PLAIN,OPTIONAL END(PIPE) 2ND END | | FLOW CONTROL DEVICE NORMAL OPERATION POSITION | CLOSED | | FLOW CONTROL DEVICE | DISK | | MATERIAL | ALUMINUM ALLOY OVERALL | | MAXIMUM OPERATING TEMP | 200.0 FAHRENHEIT SINGLE RESPONSE | | MAXIMUM OPERATING PRESSURE | 50.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | MEDIA FOR WHICH DESIGNED | AIR SINGLE RESPONSE | | MOUNTING POSITION | VERTICAL | | NOMINAL THREAD SIZE | 0.190 INCHES 2ND END | | NOMINAL THREAD SIZE | 0.375 INCHES 1ST END | | SEAT ANGLE | 37.0 DEGREES 1ST END | | SPECIAL FEATURES | OUTLET EXHAUST PARALLEL TO INTAKE | | SPECIAL TEST FEATURES | SELECTED ITEM DRAWING | | STYLE DESIGNATOR | ANGLE | | TEST DATA DOCUMENT | 97942-585R559 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | THREAD CLASS | 3A 1ST END | | THREAD CLASS | 3B 2ND END | | THREAD DIRECTION | RIGHT-HAND 1ST END | | THREAD DIRECTION | RIGHT-HAND 2ND END | | THREAD SERIES DESIGNATOR | UNF 2ND END | | THREAD SERIES DESIGNATOR | UNJF 1ST END | | VALVE OPERATION METHOD | SOLENOID | | VOLTAGE IN VOLTS AND CURRENT TYPE | 28.0 DC |
|
|