4810-01-181-8489, VALVE,SOLENOID

National Stock Number:
4810-01-181-8489

Federal Supply Class:
4810

National Item Identification Number:
011818489

Description:
VALVE,SOLENOID

Detail:
A valve having two or more ports with valve stem or pilot needle in a normally open or closed position. It is specifically designed to stop or start or change the flow of fluid by means of the magnetic action of an electric coil on a moveable core or plunger. The valve may be equipped with a manual opening or closing device. For items with three or more ports that utilize a reciprocating slide with recess areas which mate with ports in an integral or replaceable ported sleeve, see VALVE (1), LINEAR, DIRECTIONAL CONTROL. It may be inline or cartridge (manifold) design. Excludes VALVE (1), BUTTERFLY.

Manufacturer Information:

8316C24-120AC/60

04845

AUTOMATIC SWITCH COMPANY

Techincal Specification:

APERTURE DIAMETER	0.625 INCHES NOMINAL
CENTER TO CENTER DISTANCE	1.375 INCHES
CONNECTION STYLE	PLAIN,OPTIONAL END(PIPE) ALL ENDS
CONNECTION TYPE	THREADED INTERNAL PIPE ALL ENDS
CURRENT RATING IN AMPS	0.139
FLOW CONTROL DEVICE NORMAL OPERATION POSITION	CLOSED
FLOW CONTROL DEVICE	DISK
FREQUENCY IN HERTZ	60.0
INLET/OUTLET OPERATING PRESSURE DIFFERENTIAL	10.0 POUNDS PER SQUARE INCH MINIMUM AND 250.0 POUNDS PER SQUARE INCH MAXIMUM
MATERIAL	COPPER ALLOY BODY
MATERIAL	RUBBER SYNTHETIC FLOW CONTROL DEVICE
PHASE	SINGLE
MAXIMUM OPERATING PRESSURE	250.0 POUNDS PER SQUARE INCH SINGLE RESPONSE
MAXIMUM OPERATING TEMP	180.0 FAHRENHEIT SINGLE RESPONSE
MEDIA FOR WHICH DESIGNED	WATER, FRESH THIRD RESPONSE
MEDIA FOR WHICH DESIGNED	AIR FIRST RESPONSE
MEDIA FOR WHICH DESIGNED	GAS, INERT SECOND RESPONSE
MOUNTING POSITION	HORIZONTAL OR VERTICAL
NOMINAL THREAD SIZE	0.500 INCHES ALL ENDS
STYLE DESIGNATOR	STRAIGHT THRU
THREAD DIRECTION	RIGHT-HAND ALL ENDS
THREAD SERIES DESIGNATOR	NPT ALL ENDS
VALVE OPERATION METHOD	SOLENOID
VOLTAGE IN VOLTS AND CURRENT TYPE	120.0 AC

Click here to Register for Free 30-day Trial