|
|
|
National Stock Number:
4810-01-261-5226
Federal Supply Class:
4810
National Item Identification Number:
012615226
Description:
VALVE,SOLENOID
Detail:
A valve having two or more ports with valve stem or pilot needle in a normally open or closed position. It is specifically designed to stop or start or change the flow of fluid by means of the magnetic action of an electric coil on a moveable core or plunger. The valve may be equipped with a manual opening or closing device. For items with three or more ports that utilize a reciprocating slide with recess areas which mate with ports in an integral or replaceable ported sleeve, see VALVE (1), LINEAR, DIRECTIONAL CONTROL. It may be inline or cartridge (manifold) design. Excludes VALVE (1), BUTTERFLY.
|
Manufacturer Information:
| 882661-21 | 12779 | SERVOTRONICS INC | | 882661-21 | 59364 | HONEYWELL INTERNATIONAL INC. | | 99-D0074-21 | 12779 | SERVOTRONICS INC |
|
Techincal Specification:
| SURFACE TREATMENT | ANODIZE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625TYPE II CLASS 2 MIL SPEC ALL TREATMENT RESPONSES | | STYLE DESIGNATOR | ANGLE | | FLOW CONTROL DEVICE | DISK | | MEDIA FOR WHICH DESIGNED | AIR SINGLE RESPONSE | | MAXIMUM OPERATING PRESSURE | 35.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | VALVE OPERATION METHOD | AIR | | FLOW CONTROL DEVICE NORMAL OPERATION POSITION | CLOSED | | CONNECTION TYPE | THREADED INTERNAL PIPE 1ST END | | UNTHREADED INTERNAL TUBE 2ND END | | CONNECTION STYLE | PLAIN,OPTIONAL END(PIPE) 1ST END | | SOCKET (TUBE) 2ND END | | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.013 INCHES 2ND END | | THREAD SERIES DESIGNATOR | UNF 1ST END | | NOMINAL THREAD SIZE | 0.437 INCHES 1ST END | | THREAD CLASS | 3B 1ST END | | THREAD DIRECTION | RIGHT-HAND 1ST END | | SPECIAL FEATURES | LOCATION VENT PORT,FARSIDE PER DWG CAGE 12779,PN 99-D0074-21 |
|
|