|
|
|
National Stock Number:
4810-01-285-8390
Federal Supply Class:
4810
National Item Identification Number:
012858390
Description:
VALVE,SOLENOID
Detail:
A valve having two or more ports with valve stem or pilot needle in a normally open or closed position. It is specifically designed to stop or start or change the flow of fluid by means of the magnetic action of an electric coil on a moveable core or plunger. The valve may be equipped with a manual opening or closing device. For items with three or more ports that utilize a reciprocating slide with recess areas which mate with ports in an integral or replaceable ported sleeve, see VALVE (1), LINEAR, DIRECTIONAL CONTROL. It may be inline or cartridge (manifold) design. Excludes VALVE (1), BUTTERFLY.
|
Manufacturer Information:
| V53DB2100 115V/60HZ | 81978 | PARKER-HANNIFIN CORPORATION |
|
Techincal Specification:
| MATERIAL | STEEL CORROSION RESISTING BODY | | STYLE DESIGNATOR | CROSS | | FLOW CONTROL DEVICE | DISK | | MEDIA FOR WHICH DESIGNED | AIR 1ST RESPONSE | | HYDRAULIC FLUID, MINERAL BASE 2ND RESPONSE | | WATER-OIL-GAS 3RD RESPONSE | | MAXIMUM OPERATING PRESSURE | 100.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | VALVE OPERATION METHOD | SOLENOID | | VOLTAGE IN VOLTS AND CURRENT TYPE | 115.0 AC | | FREQUENCY IN HERTZ | 60.0 | | PHASE | SINGLE | | CURRENT RATING IN AMPS | 0.122 | | FLOW CONTROL DEVICE NORMAL OPERATION POSITION | CLOSED | | CONNECTION TYPE | THREADED INTERNAL PIPE ALL ENDS | | CONNECTION STYLE | PLAIN,OPTIONAL END(PIPE) ALL ENDS | | THREAD SERIES DESIGNATOR | NPT ALL ENDS | | NOMINAL THREAD SIZE | 0.250 INCHES ALL ENDS | | THREAD DIRECTION | RIGHT-HAND ALL ENDS | | MOUNTING POSITION | HORIZONTAL OR | | VERTICAL |
|
|