| BOLT HOLE QUANTITY | 114 |
| BONNET ATTACHMENT METHOD | BOLTED |
| BONNET TYPE | OUTSIDE SCREW-YOKE |
| CONNECTION TYPE | FLANGE, RECTANGULAR W/O HOLES |
| FURNISHED ITEMS AND QUANTITY | 1 CAP AND 1 GASKET AND 23 NUT |
| FACE TO FACE DISTANCE | 9.500 INCHES |
| FLANGE DIAMETER | 12.375 INCHES |
| FREQUENCY IN HERTZ | 60.0 |
| INLET RELATIONSHIP WITH OUTLET | IDENTICAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-390A, ALLOY 903, TYPE 1 FED SPEC SINGLE MATERIAL RESPONSE BODY |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-390A, ALLOY 903, TYPE 1 FED SPEC SINGLE MATERIAL RESPONSE DISK |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-286, CLASS A FED SPEC SINGLE MATERIAL RESPONSE STEM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-288, COMPA FED SPEC SINGLE MATERIAL RESPONSE SEAT |
| MATERIAL | COPPER ALLOY 903 BODY |
| MATERIAL | COPPER ALLOY 903 DISK |
| MATERIAL | NICKEL ALLOY SEAT |
| MATERIAL | NICKEL ALLOY 502 STEM |
| MAXIMUM OPERATING PRESSURE AND MEDIA FOR WHICH DESIGNED | 250.0 POUNDS PER SQUARE INCH WATER-OIL-GAS |
| PHASE | THREE |
| PRECIOUS MATERIAL AND LOCATION | SOLDER SILVER |
| PRESSURE CLASS | 250.0 POUNDS PER SQUARE INCH |
| PRECIOUS MATERIAL | SILVER |
| STEM TYPE | RISING |
| TEST DATA DOCUMENT | 43689-253872 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| VALVE OPERATION METHOD | ELECTRIC MOTOR |
| VALVE SIZE | 8.000 INCHES |
| VOLTAGE IN VOLTS AND CURRENT TYPE | 440.0 AC |