| BOLT HOLE NOMINAL DIAMETER | 0.166 INCHES ALL ENDS |
| BOLT HOLE QUANTITY | 2 ALL ENDS |
| CENTER TO CENTER DISTANCE | 3.940 INCHES |
| CENTER TO CENTER NOMINAL DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 3.688 INCHES ALL ENDS |
| CONNECTION TYPE | THREADED INTERNAL PIPE ALL ENDS |
| CONNECTION STYLE | PLAIN,OPTIONAL END(PIPE) ALL ENDS |
| CURRENT RATING IN AMPS | 0.020 |
| FLOW CONTROL DEVICE NORMAL OPERATION POSITION | OPEN |
| INLET/OUTLET OPERATING PRESSURE DIFFERENTIAL | 150.0 POUNDS PER SQUARE INCH NOMINAL |
| MATERIAL | ALUMINUM SEAT |
| MATERIAL | PLASTIC ACETAL BODY |
| MATERIAL | STEEL CORROSION RESISTING BODY LINING |
| MAXIMUM OPERATING TEMP | -50.0 FAHRENHEIT 1ST RESPONSE |
| MAXIMUM OPERATING TEMP | 200.0 FAHRENHEIT 2ND RESPONSE |
| MINIMUM OPERATING TEMP | -50.0 FAHRENHEIT |
| MOUNTING POSITION | HORIZONTAL |
| NOMINAL LENGTH | 3.940 INCHES ALL ENDS |
| NOMINAL THICKNESS | 1.000 INCHES ALL ENDS |
| NOMINAL THREAD SIZE | 0.250 INCHES ALL ENDS |
| NOMINAL WIDTH | 3.190 INCHES ALL ENDS |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | VALVE, SOLENOID 25TA, 24VDC |
| POWER DRIVE OPERATING PRESSURE | 150.0 POUNDS PER SQUARE INCH NOMINAL |
| STYLE DESIGNATOR | STRAIGHT THRU |
| SURFACE TREATMENT | ANODIZE |
| THREAD DIRECTION | RIGHT-HAND ALL ENDS |
| THREAD SERIES DESIGNATOR | NPTF ALL ENDS |
| VALVE OPERATION METHOD | SOLENOID |
| VOLTAGE IN VOLTS AND CURRENT TYPE | 24.0 DC |