| MATERIAL | ALUMINUM ALLOY BODY |
| ALUMINUM ALLOY BODY LINING |
| STEEL COMP 440A FLOW CONTROL DEVICE |
| ALUMINUM ALLOY SEAT |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/6,ALLOY 2024 FED SPEC SINGLE MATERIAL RESPONSE BODY |
| QQ-A-225/6, ALLOY 2024 FED SPEC SINGLE MATERIAL RESPONSE BODY LINING |
| 66 FED STD SINGLE MATERIAL RESPONSE FLOW CONTROL DEVICE |
| SURFACE TREATMENT | ANODIZE |
| STYLE DESIGNATOR | ANGLE |
| FLOW CONTROL DEVICE | POPPET |
| MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID, PHOSPHATE-ESTER BASE SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE |
| MAXIMUM OPERATING TEMP | -65.0 DEG FAHRENHEIT 1ST RESPONSE |
| 275.0 DEG FAHRENHEIT 2ND RESPONSE |
| VALVE OPERATION METHOD | AUTOMATIC |
| CONNECTION TYPE | THREADED EXTERNAL TUBE ALL ENDS |
| CONNECTION STYLE | FLARED (TUBE) ALL ENDS |
| SEAT ANGLE | 37.0 DEGREES 2ND END |
| THREAD SERIES DESIGNATOR | UNJF ALL ENDS |
| NOMINAL THREAD SIZE | 0.750 INCHES ALL ENDS |
| THREAD CLASS | 3A ALL ENDS |
| THREAD DIRECTION | RIGHT-HAND ALL ENDS |
| MOUNTING POSITION | HORIZONTAL OR |
| VERTICAL |
| DISK LOADING METHOD | SPRING |
| SPECIAL FEATURES | SECOND END PER MS 33657-8 |
| TEST DATA DOCUMENT | 99240-2C5828 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 99240 |
| DESIGN CONTROL REFERENCE | 2C5828 |