| BOLT CIRCLE NOMINAL DIAMETER | 5.875 INCHES SECOND END |
| BOLT CIRCLE NOMINAL DIAMETER | 7.250 INCHES FIRST END |
| BOLT HOLE NOMINAL DIAMETER | 0.875 INCHES FIRST END |
| BOLT HOLE NOMINAL DIAMETER | 0.875 INCHES SECOND END |
| BOLT HOLE QUANTITY | 8 FIRST END |
| BOLT HOLE QUANTITY | 8 SECOND END |
| BONNET ATTACHMENT METHOD | BOLTED |
| BONNET TYPE | EXPOSED SPRING |
| CONNECTION TYPE | FLANGE SECOND END |
| CONNECTION TYPE | FLANGE FIRST END |
| DISK LOADING METHOD | SPRING |
| FEATURES PROVIDED | PRESSURE TIGHT OUTLET SIDE |
| FLANGE FACE DESIGN | PLAIN SECOND END |
| FLANGE FACE DESIGN | RAISED STRAIGHT FIRST END |
| FLANGE SHAPE | ROUND WITH HOLES FIRST END |
| FLANGE SHAPE | ROUND WITH HOLES SECOND END |
| FLOW CONTROL DEVICE | DISK |
| NOMINAL OUTSIDE DIAMETER | 7.500 INCHES SECOND END |
| NOMINAL OUTSIDE DIAMETER | 9.000 INCHES FIRST END |
| NOMINAL THICKNESS | 1.125 INCHES FIRST END |
| NOMINAL THICKNESS | 1.125 INCHES SECOND END |
| OPENING PRESSURE SETTING | 715.0 POUNDS PER SQUARE INCH |
| RAISED FACE NOMINAL DIAMETER | 5.500 INCHES FIRST END |
| RAISED FACE NOMINAL HEIGHT | 0.062 INCHES FIRST END |
| REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY THE VALVE DISCHARGE FLOW RATE REQUIREMENT AND AS MODIFIED BY CROSBY VALVE AND GAGE CO DRAWING H43589 MOD 3 |
| RENEWABLE SEAT RING TYPE | THREADED |
| STYLE DESIGNATOR | ANGLE FLANGED ENDS |
| SPECIAL FEATURES | THE END CONNECTION IDENTIFIED ABOVE AS THE SECOND END IS THE VALVE INLET |
| VALVE OPERATION METHOD | AUTOMATIC OR MANUAL |
| VALVE SIZE | 2.500 INCHES |
| VALVE DISCHARGE FLOW RATE | 32500.0 POUNDS PER HOUR |