|
|
|
National Stock Number:
4820-00-231-2510
Federal Supply Class:
4820
National Item Identification Number:
002312510
Description:
VALVE,GLOBE
Detail:
A valve with one inlet and one outlet connection with outlet flow parallel to inlet flow. The flow is controlled by the action of a stem which lifts the disk perpendicularly off the center axis of its seat. The stem is at a 90 degree (1.5708 radians) angle to axis of flow. Excludes VALVE, STOP-CHECK; COCK, SHUTOFF, SCREW STEM; and VALVE, SOLENOID.
|
Manufacturer Information:
| 803-2177525-C511 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 803-2177525-C511AF | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 803-2177525-C511AFL1 | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | 803-2177525-C511L1 | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | 803-2177525-C5A1AFL1 | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | 803-2177525-C5A1AF | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 810-2177525ASSYGS1INSWLDGL1 | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | 810-2177525C511L1 | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | 810-2177525ASSYGS1INSWLDG | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 810-2177525C511 | 80064 | NAVAL SHIP SYSTEMS COMMAND |
|
Techincal Specification:
| BONNET ATTACHMENT METHOD | BOLTED | | BONNET TYPE | OUTSIDE SCREW-YOKE | | CONNECTION TYPE | UNTHREADED INTERNAL PIPE 1ST END | | CONNECTION STYLE | SOCKET 1ST END | | CRITICALITY CODE JUSTIFICATION | ZZZY | | FEATURES PROVIDED | BONNET PACKING | | FLOW CONTROL DEVICE | DISK | | MATERIAL | STEEL AND STEEL CORROSION RESISTING FLOW CONTROL DEVICE | | MATERIAL | STEEL BODY | | MATERIAL | STEEL CORROSION RESISTING SEAT | | MATERIAL | STEEL STEM | | MAXIMUM OPERATING TEMP | 775.0 FAHRENHEIT SINGLE RESPONSE | | NOMINAL PIPE SIZE ACCOMMODATED | 1.000 INCHES 1ST END | | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | MATERIAL CONTROLLED IAW NAVSEA 0948-LP-045-7010 MATERIAL CONTROL STANDARD FOR LEVEL I ITEMS | | STYLE DESIGNATOR | STRAIGHT THRU | | TEST DATA DOCUMENT | 80064-810-2177525 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | VALVE OPERATION METHOD | MANUAL |
|
|