| BOLT HOLE NOMINAL DIAMETER | 0.175 INCHES 2ND END |
| BOLT CIRCLE NOMINAL DIAMETER | 1.500 INCHES 2ND END |
| BOLT HOLE QUANTITY | 4 2ND END |
| CONNECTION TYPE | FLANGE 2ND END |
| CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END |
| CONNECTION STYLE | FLARED (TUBE) 1ST END |
| FURNISHED ITEMS AND QUANTITY | 4 NUT |
| FLANGE FACE DESIGN | RAISED STRAIGHT 2ND END |
| FLANGE SHAPE | ROUND WITH HOLES 2ND END |
| FLOW CONTROL DEVICE | POPPET |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11, ALLOY 6061 FED SPEC SINGLE MATERIAL RESPONSE BODY |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11, ALLOY 6061 FED SPEC SINGLE MATERIAL RESPONSE FLOW CONTROL DEVICE |
| MATERIAL | ALUMINUM ALLOY 6061 BODY |
| MATERIAL | ALUMINUM ALLOY 6061 FLOW CONTROL DEVICE |
| MAXIMUM OPERATING TEMP | 165.0 FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 12.0 POUNDS PER SQUARE INCH 1ST RESPONSE |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.250 INCHES 1ST END |
| NOMINAL OUTSIDE DIAMETER | 2.000 INCHES 2ND END |
| NOMINAL THICKNESS | 0.100 INCHES 2ND END |
| NOMINAL THREAD SIZE | 0.437 INCHES 1ST END |
| RAISED FACE NOMINAL DIAMETER | 1.000 INCHES 2ND END |
| RAISED FACE NOMINAL HEIGHT | 0.100 INCHES 2ND END |
| REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY SOURCE CONTROL DRAWING NUMBER |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| STYLE DESIGNATOR | STRAIGHT THRU |
| SURFACE TREATMENT | CADMIUM |
| THREAD CLASS | 3A 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD SERIES DESIGNATOR | UNF 1ST END |
| THREAD QUANTITY PER INCH | 20 1ST END |
| VALVE OPERATION METHOD | MANUAL |