| MATERIAL | ALUMINUM ALLOY 6061 BODY |
| ALUMINUM ALLOY 2024 OR |
| RUBBER FLOW CONTROL DEVICE |
| ALUMINUM ALLOY 6061 SEAT |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/8,ALLOY 6061,T651 FED SPEC SINGLE MATERIAL RESPONSE BODY |
| QQ-A-200/3,ALLOY 2024,T4 FED SPEC 1ST MATERIAL RESPONSE OR |
| RUBBER FLOUROCARBON SYNTHETIC/VITON/MIL-R-25897,TYPE1,CLASS 1 MIL SPEC 2ND MATERIAL RESPONSE FLOW CONTROL DEVICE |
| QQ-A-225/8,AALOY 6061,T651 FED SPEC SINGLE MATERIAL RESPONSE SEAT |
| SURFACE TREATMENT | ANODIZE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TY 2 MIL SPEC SINGLE TREATMENT RESPONSE |
| STYLE DESIGNATOR | STRAIGHT THRU |
| FLOW CONTROL DEVICE | POPPET |
| MEDIA FOR WHICH DESIGNED | AIR 1ST RESPONSE |
| FUEL/OIL, HYDROCARBON 2ND RESPONSE |
| MAXIMUM OPERATING PRESSURE | 400.0 POUNDS PER SQUARE INCH SINGLE RESPONSE |
| MAXIMUM OPERATING TEMP | 400.0 DEG FAHRENHEIT SINGLE RESPONSE |
| VALVE OPERATION METHOD | AUTOMATIC |
| CONNECTION TYPE | FLANGE 1ST END |
| FLANGE SHAPE | RECTANGULAR WITH HOLES 1ST END |
| NOMINAL THICKNESS | 0.300 INCHES 1ST END |
| NOMINAL LENGTH | 2.375 INCHES 1ST END |
| NOMINAL WIDTH | 2.375 INCHES 1ST END |
| BOLT HOLE QUANTITY | 4 1ST END |
| BOLT HOLE NOMINAL DIAMETER | 0.250 INCHES 1ST END |
| CENTER TO CENTER NOMINAL DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.812 INCHES 1ST END |
| CENTER TO CENTER NOMINAL DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.812 INCHES 1ST END |
| FLANGE FACE DESIGN | PLAIN 1ST END |
| MOUNTING POSITION | HORIZONTAL |
| DISK LOADING METHOD | WEIGHT |