|
|
|
National Stock Number:
4820-00-388-9273
Federal Supply Class:
4820
National Item Identification Number:
003889273
Description:
VALVE,GLOBE
Detail:
A valve with one inlet and one outlet connection with outlet flow parallel to inlet flow. The flow is controlled by the action of a stem which lifts the disk perpendicularly off the center axis of its seat. The stem is at a 90 degree (1.5708 radians) angle to axis of flow. Excludes VALVE, STOP-CHECK; COCK, SHUTOFF, SCREW STEM; and VALVE, SOLENOID.
|
Manufacturer Information:
| T180A | 1X438 | ALTA ROBBINS, INC. | | T180A | 62073 | DYNATECH FRONTIER CORP SUB OF DYNATECH CORP |
|
Techincal Specification:
| BONNET ATTACHMENT METHOD | THREADED | | BONNET TYPE | INSIDE SCREW | | CONNECTION STYLE | PLAIN,OPTIONAL END(PIPE) 1ST END | | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END | | FLOW CONTROL DEVICE | DISK | | MATERIAL | PLASTIC POLYCHLOROTRIFLUOROETHYLENE FLOW CONTROL DEVICE | | MATERIAL | STEEL CORROSION RESISTING BODY | | MATERIAL | STEEL CORROSION RESISTING SEAT | | MATERIAL | STEEL CORROSION RESISTING STEM | | MAXIMUM OPERATING TEMP | 250.0 FAHRENHEIT SINGLE RESPONSE | | MAXIMUM OPERATING PRESSURE | 6000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | MOUNTING FACILITY | BULKHEAD | | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.375 INCHES 1ST END | | NOMINAL THREAD SIZE | 0.562 INCHES 1ST END | | RENEWABLE SEAT RING TYPE | PRESSED-IN | | STYLE DESIGNATOR | STRAIGHT THRU | | THREAD CLASS | 3B 1ST END | | THREAD DIRECTION | RIGHT-HAND 1ST END | | THREAD SERIES DESIGNATOR | ANPT 1ST END | | VALVE OPERATION METHOD | MANUAL |
|
|