|
|
|
National Stock Number:
4820-00-390-7813
Federal Supply Class:
4820
National Item Identification Number:
003907813
Description:
VALVE,ANGLE
Detail:
A valve with one inlet and one outlet connection with outlet flow at an angle to inlet flow. The flow is controlled by the action of a stem which lifts disks perpendicularly off the center axis of its seat. It may be inline or cartridge (manifold) design. Excludes VALVE (1), Y; VALVE, STOP-CHECK; and COCK, SHUTOFF, SCREW STEM.
|
Manufacturer Information:
| 072 067 000 0 | H0080 | N.V. LINDE GAS BENELUX | | 10206418 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 2755 | 27783 | SCHRADER-BRIDGEPORT INTERNATIONAL INC DBA SCHRADER AUTOMOTIVE | | 2755 | 53477 | SCOVILL INC SCHRADER BELLOWS DIV | | 13002-5 | F0086 | SOCATA | | 200834 | H0G87 | WIBA ZEVENAAR B.V. | | HF2011 | 13899 | HYDRO-FITTING MANUFACTURING CORPORATION | | 900593-4 | 56190 | METADURE PARTS & SALES, INC. | | 4820PL0645058 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | Z00N7886114804 | F0086 | SOCATA | | 2755 | F0826 | SCHRADER SA | | 4910A093 | H0099 | KONINKLYKE LANDMACHT DMKL, DIRECTEURMATERIEEL KONINKLYKE LANDMACHT TEKENINGEN, TEKENINGENARCHIEF |
|
Techincal Specification:
| BONNET ATTACHMENT METHOD | THREADED | | BONNET TYPE | INSIDE SCREW | | CONNECTION STYLE | SWIVEL NUT,GASKET SEAL(TUBE) 2ND END | | CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END | | CONNECTION STYLE | FLARED (TUBE) 1ST END | | CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END | | FLOW CONTROL DEVICE | NEEDLE | | MATERIAL | STEEL BODY | | MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | MEDIA FOR WHICH DESIGNED | WATER-OIL-GAS SINGLE RESPONSE | | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.125 INCHES 2ND END | | NOMINAL THREAD SIZE | 0.312 INCHES 2ND END | | NOMINAL THREAD SIZE | 0.375 INCHES 1ST END | | SEAT ANGLE | 45.0 DEGREES 1ST END | | STYLE DESIGNATOR | ANGLE | | THREAD CLASS | 3A 1ST END | | THREAD CLASS | 3B 2ND END | | THREAD DIRECTION | RIGHT-HAND ALL ENDS | | THREAD SERIES DESIGNATOR | UNF 1ST END | | THREAD SERIES DESIGNATOR | UNEF 2ND END | | VALVE OPERATION METHOD | MANUAL |
|
|