|
|
|
National Stock Number:
4820-00-421-5878
Federal Supply Class:
4820
National Item Identification Number:
004215878
Description:
VALVE,GLOBE
Detail:
A valve with one inlet and one outlet connection with outlet flow parallel to inlet flow. The flow is controlled by the action of a stem which lifts the disk perpendicularly off the center axis of its seat. The stem is at a 90 degree (1.5708 radians) angle to axis of flow. Excludes VALVE, STOP-CHECK; COCK, SHUTOFF, SCREW STEM; and VALVE, SOLENOID.
|
Manufacturer Information:
| A404728-6N | 80020 | NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION CODE 4.8.8.0.0.B BLDG 148-2 |
|
Techincal Specification:
| MATERIAL | COPPER ALLOY AND | | STEEL BODY | | STYLE DESIGNATOR | STRAIGHT THRU | | FLOW CONTROL DEVICE | DISK | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON 1ST RESPONSE | | AIR 2ND RESPONSE | | MAXIMUM OPERATING TEMP | 275.0 DEG FAHRENHEIT SINGLE RESPONSE | | VALVE OPERATION METHOD | MANUAL | | CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END | | THREAD SERIES DESIGNATOR | UN 1ST END | | NOMINAL THREAD SIZE | 2.750 INCHES 1ST END | | THREAD QUANTITY PER INCH | 12 1ST END | | THREAD CLASS | 3A 1ST END | | THREAD DIRECTION | RIGHT-HAND 1ST END | | BONNET TYPE | PACKING RETAINING | | TEST DATA DOCUMENT | 80020-A404728 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 80020 | | DESIGN CONTROL REFERENCE | A404728-6N |
|
|