|
|
|
National Stock Number:
4820-00-612-3769
Federal Supply Class:
4820
National Item Identification Number:
006123769
Description:
VALVE,ANGLE
Detail:
A valve with one inlet and one outlet connection with outlet flow at an angle to inlet flow. The flow is controlled by the action of a stem which lifts disks perpendicularly off the center axis of its seat. It may be inline or cartridge (manifold) design. Excludes VALVE (1), Y; VALVE, STOP-CHECK; and COCK, SHUTOFF, SCREW STEM.
|
Manufacturer Information:
| 2-00003-558 | 03848 | ARMA DIV AMBAC INDUSTRIES INC | | 59-09 | 98391 | ARKWIN INDUSTRIES, INC. | | 59-09-1 | 98391 | ARKWIN INDUSTRIES, INC. |
|
Techincal Specification:
| CONNECTION TYPE | UNTHREADED EXTERNAL HOSE 2ND END | | CONNECTION STYLE | DOUBLE BEADED (HOSE) 2ND END | | CONNECTION STYLE | DOUBLE THREADED SECTION BOSS FITTING GASKET WITH LOCKNUT SEALING (BOSS) 1ST END | | FURNISHED ITEMS AND QUANTITY | 1 CAP AND 1 CHAIN | | FLOW CONTROL DEVICE | BALL | | MAXIMUM OPERATING PRESSURE | 100.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE | | NOMINAL INSIDE DIAMETER HOSE ACCOMMODATED | 0.250 INCHES 2ND END | | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.250 INCHES 1ST END | | NOMINAL THREAD SIZE | 0.437 INCHES 1ST END | | SEAT ANGLE | 37.0 DEGREES 1ST END | | STYLE DESIGNATOR | ANGLE | | SURFACE TREATMENT | ANODIZE | | THREAD DIRECTION | RIGHT-HAND 1ST END | | THREAD CLASS | 3A 1ST END | | THREAD SERIES DESIGNATOR | UNF 1ST END | | THREAD QUANTITY PER INCH | 20 1ST END | | VALVE OPERATION METHOD | MANUAL |
|
|