|
|
|
National Stock Number:
4820-00-825-1489
Federal Supply Class:
4820
National Item Identification Number:
008251489
Description:
VALVE,ANGLE
Detail:
A valve with one inlet and one outlet connection with outlet flow at an angle to inlet flow. The flow is controlled by the action of a stem which lifts disks perpendicularly off the center axis of its seat. It may be inline or cartridge (manifold) design. Excludes VALVE (1), Y; VALVE, STOP-CHECK; and COCK, SHUTOFF, SCREW STEM.
|
Manufacturer Information:
| 29955 1-1/4IN | 14959 | CRANE CO DIV VALVE DIV | | 81571-00-1-1/4INC1D882003663 | 76364 | MILWAUKEE VALVE CO, INC | | MILV22094 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BONNET ATTACHMENT METHOD | BOLTED | | BONNET TYPE | OUTSIDE SCREW-YOKE | | CONNECTION TYPE | UNTHREADED INTERNAL PIPE ALL ENDS | | CONNECTION STYLE | SOCKET ALL ENDS | | FEATURES PROVIDED | BONNET PACKING | | FLOW CONTROL DEVICE | DISK | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTMA182,GRADEF11 ASSN STD SINGLE MATERIAL RESPONSE BODY | | MATERIAL DOCUMENT AND CLASSIFICATION | FEDSTD66 FED STD SINGLE MATERIAL RESPONSE STEM | | MATERIAL | COBALT ALLOY SEAT | | MATERIAL | STEEL BODY | | MATERIAL | STEEL COMP 410 STEM | | MAXIMUM OPERATING TEMP | 1000.0 FAHRENHEIT SINGLE RESPONSE | | MAXIMUM OPERATING PRESSURE | 1500.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | MEDIA FOR WHICH DESIGNED | WATER-OIL-GAS SINGLE RESPONSE | | NOMINAL PIPE SIZE ACCOMMODATED | 1.250 INCHES ALL ENDS | | NONDEFINITIVE SPEC/STD DATA | B CLASS | | SPECIAL FEATURES | VALVE SIZE 1.250 IN. | | STYLE DESIGNATOR | ANGLE | | TEST DATA DOCUMENT | 81349-MIL-V-22094 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | VALVE OPERATION METHOD | MANUAL |
|
|