|
|
|
National Stock Number:
4820-00-939-7940
Federal Supply Class:
4820
National Item Identification Number:
009397940
Description:
VALVE,ANGLE
Detail:
A valve with one inlet and one outlet connection with outlet flow at an angle to inlet flow. The flow is controlled by the action of a stem which lifts disks perpendicularly off the center axis of its seat. It may be inline or cartridge (manifold) design. Excludes VALVE (1), Y; VALVE, STOP-CHECK; and COCK, SHUTOFF, SCREW STEM.
|
Manufacturer Information:
| 413-1B1CRBNSTLL1 | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | A11032-1-2L1 | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | MILV22094L1 | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | W3-375B-2TSL1 | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | C0MPD1500PSISW1-2IN | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MILV22094 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BONNET ATTACHMENT METHOD | BOLTED | | BONNET TYPE | OUTSIDE SCREW-YOKE | | CONNECTION TYPE | UNTHREADED INTERNAL PIPE 1ST END | | CONNECTION STYLE | SOCKET 1ST END | | CRITICALITY CODE JUSTIFICATION | ZZZX | | DEPARTURE FROM CITED DESIGNATOR | QUALITY CONTROL IAW NAVSHIPS 0948-045-7010 MATERIAL IDENTIFICATION AND CONTROL INSTRUCTION FOR LEVEL 1 ITEMS | | FEATURES PROVIDED | BONNET PACKING | | FLOW CONTROL DEVICE | DISK | | MATERIAL | COBALT ALLOY FLOW CONTROL DEVICE | | MATERIAL | COBALT ALLOY SEAT | | MATERIAL | STEEL BODY | | MATERIAL | STEEL CORROSION RESISTING STEM | | MAXIMUM OPERATING TEMP | 775.0 FAHRENHEIT SINGLE RESPONSE | | MAXIMUM OPERATING PRESSURE | 1500.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | MEDIA FOR WHICH DESIGNED | STEAM SINGLE RESPONSE | | NOMINAL PIPE SIZE ACCOMMODATED | 0.500 INCHES 1ST END | | NONDEFINITIVE SPEC/STD DATA | N COMPOSITION | | RENEWABLE SEAT RING TYPE | WELDED | | STYLE DESIGNATOR | ANGLE | | TEST DATA DOCUMENT | 81349-MIL-V-22094 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | VALVE OPERATION METHOD | MANUAL |
|
|