| CONNECTION TYPE | THREADED EXTERNAL TUBE ALL ENDS |
| CONNECTION STYLE | FLARELESS ALL ENDS |
| DISK LOADING METHOD | SPRING |
| FLOW CONTROL DEVICE | POPPET |
| MATERIAL | ALUMINUM ALLOY BODY |
| MATERIAL | STEEL CORROSION RESISTING FLOW CONTROL DEVICE |
| MATERIAL | STEEL CORROSION RESISTING SEAT |
| MAXIMUM OPERATING TEMP | 200.0 FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE |
| MEDIA FOR WHICH DESIGNED | AIR 1ST RESPONSE |
| MEDIA FOR WHICH DESIGNED | WATER-OIL-GAS 2ND RESPONSE |
| MOUNTING POSITION | HORIZONTAL OR VERTICAL |
| NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.375 INCHES 1ST END |
| NOMINAL THREAD SIZE | 0.562 INCHES ALL ENDS |
| RENEWABLE SEAT RING TYPE | PRESSED-IN |
| SEAT ANGLE | 12.0 DEGREES 1ST END |
| STYLE DESIGNATOR | STRAIGHT THRU |
| SPECIAL FEATURES | RATED FOR 3.0 GPM FLOW |
| TEST DATA DOCUMENT | 97403-13207E2639 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| THREAD DIRECTION | RIGHT-HAND ALL ENDS |
| THREAD CLASS | 3A ALL ENDS |
| THREAD SERIES DESIGNATOR | UNF ALL ENDS |
| VALVE OPERATION METHOD | AUTOMATIC |