|
|
|
National Stock Number:
4820-00-945-1726
Federal Supply Class:
4820
National Item Identification Number:
009451726
Description:
VALVE,ANGLE
Detail:
A valve with one inlet and one outlet connection with outlet flow at an angle to inlet flow. The flow is controlled by the action of a stem which lifts disks perpendicularly off the center axis of its seat. It may be inline or cartridge (manifold) design. Excludes VALVE (1), Y; VALVE, STOP-CHECK; and COCK, SHUTOFF, SCREW STEM.
|
Manufacturer Information:
| 2620-902 | 96169 | ELECTRIC BOAT CORPORATION | | 2620-902ASSYD2 | 96169 | ELECTRIC BOAT CORPORATION | | 2620-902ASSYD2L1 | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | 2620-902L1 | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | 594-1-2L1 | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG |
|
Techincal Specification:
| BONNET ATTACHMENT METHOD | THREADED | | BONNET TYPE | INSIDE SCREW | | CONNECTION TYPE | UNTHREADED INTERNAL PIPE 1ST END | | FEATURES PROVIDED | BONNET PACKING | | FLOW CONTROL DEVICE | DISK | | MAXIMUM OPERATING TEMP | 150.0 FAHRENHEIT SINGLE RESPONSE | | MAXIMUM OPERATING PRESSURE | 700.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | MEDIA FOR WHICH DESIGNED | WATER-OIL-GAS SINGLE RESPONSE | | NOMINAL PIPE SIZE ACCOMMODATED | 2.000 INCHES 1ST END | | NONDEFINITIVE SPEC/STD DATA | D ASSEMBLY | | RENEWABLE SEAT RING TYPE | THREADED | | STYLE DESIGNATOR | ANGLE | | TEST DATA DOCUMENT | 80064-SS845-1889587 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | VALVE OPERATION METHOD | MANUAL |
|
|