| DISK LOADING METHOD | SPRING |
| CONNECTION STYLE | FLARED (TUBE) 1ST END |
| CONNECTION STYLE | GASKET SEAL (BOSS) 2ND END |
| CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END |
| CONNECTION TYPE | THREADED INTERNAL BOSS 2ND END |
| FLOW CONTROL DEVICE | POPPET |
| NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.625 INCHES 1ST END |
| NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.625 INCHES 2ND END |
| NOMINAL THREAD SIZE | 0.875 INCHES 1ST END |
| NOMINAL THREAD SIZE | 0.875 INCHES 2ND END |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/6, ALLOY 2024, T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | ALUMINUM ALLOY 2024 OVERALL |
| MAXIMUM OPERATING PRESSURE | 600.0 POUNDS PER SQUARE INCH SINGLE RESPONSE |
| MAXIMUM OPERATING TEMP | 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MEDIA FOR WHICH DESIGNED | AIR 1ST RESPONSE |
| MEDIA FOR WHICH DESIGNED | CARBON DIOXIDE 2ND RESPONSE |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON 3RD RESPONSE |
| MEDIA FOR WHICH DESIGNED | HYDROGEN 4TH RESPONSE |
| MOUNTING POSITION | HORIZONTAL OR VERTICAL |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| THREAD CLASS | 3A 1ST END |
| THREAD CLASS | 3B 2ND END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| THREAD SERIES DESIGNATOR | UNF 1ST END |
| THREAD SERIES DESIGNATOR | UNJF 2ND END |
| VALVE OPERATION METHOD | AUTOMATIC |
| STYLE DESIGNATOR | STRAIGHT THRU |