|
|
|
National Stock Number:
4820-00-995-2096
Federal Supply Class:
4820
National Item Identification Number:
009952096
Description:
VALVE,GLOBE
Detail:
A valve with one inlet and one outlet connection with outlet flow parallel to inlet flow. The flow is controlled by the action of a stem which lifts the disk perpendicularly off the center axis of its seat. The stem is at a 90 degree (1.5708 radians) angle to axis of flow. Excludes VALVE, STOP-CHECK; COCK, SHUTOFF, SCREW STEM; and VALVE, SOLENOID.
|
Manufacturer Information:
| A1160A141 | 12190 | CURTISS-WRIGHT FLOW CONTROL CORPORATION | | A1160A141 | 94703 | AMFAC DISTRIBUTION CORP AMFAC SUPPLY CO AMFAC FLUID POWER | | N1514 | 38508 | DESCO CORP MARSH BELLOFRAM DIV |
|
Techincal Specification:
| BONNET TYPE | INSIDE SCREW | | BONNET ATTACHMENT METHOD | THREADED | | CONNECTION STYLE | SWIVEL NUT, FLARE(TUBE) ALL ENDS | | CONNECTION TYPE | THREADED INTERNAL TUBE ALL ENDS | | FLOW CONTROL DEVICE | DISK | | MATERIAL | STEEL OVERALL | | MAXIMUM OPERATING PRESSURE | 10000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | MEDIA FOR WHICH DESIGNED | WATER-OIL-GAS SINGLE RESPONSE | | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.625 INCHES ALL ENDS | | NOMINAL THREAD SIZE | 0.875 INCHES FIRST END | | SEAT ANGLE | 60.0 DEGREES ALL ENDS | | STYLE DESIGNATOR | STRAIGHT THRU | | THREAD CLASS | 3B ALL ENDS | | THREAD DIRECTION | RIGHT-HAND ALL ENDS | | THREAD SERIES DESIGNATOR | UNF ALL ENDS | | VALVE OPERATION METHOD | MANUAL |
|