| DISK LOADING METHOD | SPRING |
| CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END |
| CONNECTION TYPE | THREADED INTERNAL BOSS 2ND END |
| CONNECTION STYLE | GASKET SEAL(BOSS) 2ND END |
| FLOW CONTROL DEVICE | POPPET |
| MATERIAL | ALUMINUM BODY |
| MATERIAL | ALUMINUM FLOW CONTROL DEVICE |
| MATERIAL | RUBBER SYNTHETIC SEAT |
| PROPRIETARY CHARACTERISTICS | PACS |
| MAXIMUM OPERATING TEMP | 300.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 30.0 POUNDS PER SQUARE INCH SINGLE RESPONSE |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON 1ST RESPONSE |
| NOMINAL THREAD SIZE | 0.375 INCHES 1ST END |
| NOMINAL THREAD SIZE | 0.375 INCHES 2ND END |
| OPENING PRESSURE SETTING | 31.5 POUNDS PER SQUARE INCH |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| VALVE OPERATION METHOD | AUTOMATIC |
| VALVE DISCHARGE FLOW RATE | 0.15 CUBIC METERS PER MINUTE |
| STYLE DESIGNATOR | STRAIGHT THRU NOTE: TO BE USED FOR VALVE BODIES OF SEPARABLE SECTIONS. |
| THREAD CLASS | 3A 1ST END |
| THREAD CLASS | 3B 2ND END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| THREAD SERIES DESIGNATOR | UNJF 1ST END |
| THREAD SERIES DESIGNATOR | UNJF 2ND END |