|
|
|
National Stock Number:
4820-01-045-7681
Federal Supply Class:
4820
National Item Identification Number:
010457681
Description:
VALVE,ANGLE
Detail:
A valve with one inlet and one outlet connection with outlet flow at an angle to inlet flow. The flow is controlled by the action of a stem which lifts disks perpendicularly off the center axis of its seat. It may be inline or cartridge (manifold) design. Excludes VALVE (1), Y; VALVE, STOP-CHECK; and COCK, SHUTOFF, SCREW STEM.
|
Manufacturer Information:
| P13-500 | 91816 | CIRCOR AEROSPACE, INC. |
|
Techincal Specification:
| BONNET ATTACHMENT METHOD | THREADED | | BONNET TYPE | INSIDE SPRING | | CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END | | CONNECTION TYPE | UNTHREADED EXTERNAL HOSE 2ND END | | CONNECTION STYLE | BARBED-BEADED (HOSE) 2ND END | | CONNECTION STYLE | FLARELESS (TUBE) 1ST END | | FLOW CONTROL DEVICE | POPPET | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/9 FED SPEC SINGLE MATERIAL RESPONSE BODY | | MATERIAL | ALUMINUM ALLOY 7075 BODY | | MATERIAL | PLASTIC POLYAMIDE (NYLON) FLOW CONTROL DEVICE | | MAXIMUM OPERATING TEMP | 275.0 FAHRENHEIT SINGLE RESPONSE | | MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | NOMINAL INSIDE DIAMETER HOSE ACCOMMODATED | 0.312 INCHES 2ND END | | NOMINAL THREAD SIZE | 0.438 INCHES 1ST END | | SEAT ANGLE | 20.0 DEGREES 1ST END | | STYLE DESIGNATOR | ANGLE | | SURFACE TREATMENT | ANODIZE | | THREAD DIRECTION | RIGHT-HAND 1ST END | | THREAD CLASS | 2A 1ST END | | THREAD SERIES DESIGNATOR | UNF 1ST END | | VALVE OPERATION METHOD | MANUAL |
|
|