| MATERIAL | STEEL COMP 440C OR |
| STEEL COMP 630 BODY |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763, CLASS 440C FED SPEC SINGLE MATERIAL RESPONSE OR |
| AMS 5643 ASSN STD 1ST MATERIAL RESPONSE |
| TEMP RATING | -50.0 DEG FAHRENHEIT MINIMUM AND |
| 160.0 DEG FAHRENHEIT MAXIMUM |
| MAXIMUM INLET PRESSURE RATING | 3300.0 POUNDS PER SQUARE INCH |
| VALVE DISCHARGE FLOW RATE | 5.5 GALLONS PER MINUTE |
| SPECIAL FEATURES | 1.0 GPM BY-PASS RATE AT 50.0 PSID MAX 160.0 DEG F; HEX WRENCHING FACILITY |
| PACKING MATERIAL | RUBBER, SYNTHETIC |
| FLOW CONTROL DEVICE | DISK |
| FLOW CONTROL DEVICE MATERIAL | STEEL, CORROSION RESISTING, QQ-S-763, CLASS 302, 303, 304, 305, 310, OR 316 |
| END CONNECTION QUANTITY | 2 |
| FIRST END CONNECTION TYPE | THREADED EXTERNAL TUBE |
| FIRST END STYLE DESIGNATOR | FLARELESS |
| FIRST END OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.500 INCHES NOMINAL |
| FIRST END THREAD SIZE AND SERIES/TYPE DESIGNATOR | 0.7500-16 UNJF |
| FIRST END THREAD CLASS | 3A |
| FIRST END THREAD DIRECTION | RIGHT-HAND |
| FIRST END SEAT ANGLE IN DEG | 24.0 |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND END CONNECTION TYPE | THREADED EXTERNAL BOSS |
| SECOND END STYLE DESIGNATOR | EXTERNAL SEAT FOR GASKET SEAL |
| SECOND END THREAD SIZE AND SERIES/TYPE DESIGNATOR | 1.3125-12 UNJ |
| SECOND END THREAD CLASS | 3A |
| SECOND END THREAD DIRECTION | RIGHT-HAND |
| BODY STYLE | SCREW-IN CARTRIDGE |
| MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID, PETROLEUM BASE |
| REGULATION TYPE | AUTOMATIC SINGLE STAGE |
| SPEC/STD CONTROLLING DATA | |
| MANUFACTURERS CODE | 77272 |
| MFR SOURCE CONTROLLING REFERENCE | 145HS142-2 |