|
|
|
National Stock Number:
4820-01-138-4348
Federal Supply Class:
4820
National Item Identification Number:
011384348
Description:
VALVE,ANGLE
Detail:
A valve with one inlet and one outlet connection with outlet flow at an angle to inlet flow. The flow is controlled by the action of a stem which lifts disks perpendicularly off the center axis of its seat. It may be inline or cartridge (manifold) design. Excludes VALVE (1), Y; VALVE, STOP-CHECK; and COCK, SHUTOFF, SCREW STEM.
|
Manufacturer Information:
| D801-1240 | 96101 | GAS EQUIPMENT ENGINEERING CORPORATION, THE DBA GEECO |
|
Techincal Specification:
| BONNET ATTACHMENT METHOD | THREADED | | BONNET TYPE | INSIDE SCREW | | CONNECTION TYPE | THREADED EXTERNAL GAS FITTING 1ST END | | CONNECTION TYPE | THREADED EXTERNAL GAS FITTING 2ND END | | CONNECTION STYLE | GASKET SEAL (GAS FITTING) 2ND END | | CONNECTION STYLE | INVERTED FLARE (GAS FITTING) 1ST END | | FLOW CONTROL DEVICE | STEM | | MATERIAL | COPPER ALLOY BODY | | MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | MEDIA FOR WHICH DESIGNED | OXYGEN, LIQUID SINGLE RESPONSE | | NOMINAL THREAD SIZE | 0.500 INCHES 2ND END | | NOMINAL THREAD SIZE | 0.903 INCHES 1ST END | | SEAT ANGLE | 35.0 DEGREES 1ST END | | SPECIAL FEATURES | LOX CLEANED | | STYLE DESIGNATOR | ANGLE | | THREAD DIRECTION | RIGHT-HAND 1ST END | | THREAD DIRECTION | RIGHT-HAND 2ND END | | THREAD SERIES DESIGNATOR | NPTF 2ND END | | VALVE OPERATION METHOD | MANUAL |
|
|