|
|
|
National Stock Number:
4820-01-140-1860
Federal Supply Class:
4820
National Item Identification Number:
011401860
Description:
VALVE,GLOBE
Detail:
A valve with one inlet and one outlet connection with outlet flow parallel to inlet flow. The flow is controlled by the action of a stem which lifts the disk perpendicularly off the center axis of its seat. The stem is at a 90 degree (1.5708 radians) angle to axis of flow. Excludes VALVE, STOP-CHECK; COCK, SHUTOFF, SCREW STEM; and VALVE, SOLENOID.
|
Manufacturer Information:
|
Techincal Specification:
| BONNET TYPE | PACKING RETAINING | | CONNECTION TYPE | THREADED EXTERNAL PIPE 2ND END | | CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END | | CONNECTION STYLE | FLARELESS (TUBE) 1ST END | | CONNECTION STYLE | PLAIN (PIPE) 2ND END | | FLOW CONTROL DEVICE | STEM | | MATERIAL | COPPER ALLOY FLOW CONTROL DEVICE | | MATERIAL | COPPER ALLOY BODY | | MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE PACKING | | MAXIMUM OPERATING TEMP | 300.0 FAHRENHEIT SINGLE RESPONSE | | MAXIMUM OPERATING PRESSURE | 600.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID, MINERAL BASE 1ST RESPONSE | | MEDIA FOR WHICH DESIGNED | WATER, FRESH 2ND RESPONSE | | NOMINAL THREAD SIZE | 0.250 INCHES 1ST END | | NOMINAL THREAD SIZE | 0.250 INCHES 2ND END | | SEAT ANGLE | 20.0 DEGREES 1ST END | | STYLE DESIGNATOR | STRAIGHT THRU | | THREAD CLASS | 2A 1ST END | | THREAD DIRECTION | RIGHT-HAND 1ST END | | THREAD DIRECTION | RIGHT-HAND 2ND END | | THREAD SERIES DESIGNATOR | UNF 1ST END | | THREAD SERIES DESIGNATOR | NPT 2ND END | | VALVE OPERATION METHOD | MANUAL |
|
|