|
|
|
National Stock Number:
4820-01-146-4096
Federal Supply Class:
4820
National Item Identification Number:
011464096
Description:
VALVE,GLOBE
Detail:
A valve with one inlet and one outlet connection with outlet flow parallel to inlet flow. The flow is controlled by the action of a stem which lifts the disk perpendicularly off the center axis of its seat. The stem is at a 90 degree (1.5708 radians) angle to axis of flow. Excludes VALVE, STOP-CHECK; COCK, SHUTOFF, SCREW STEM; and VALVE, SOLENOID.
|
Manufacturer Information:
| 10141 | 28968 | CIRCOR INSTRUMENTATION TECHNOLOGIES, INC. | | 10141-4 | 28968 | CIRCOR INSTRUMENTATION TECHNOLOGIES, INC. |
|
Techincal Specification:
| MATERIAL | STEEL COMP 316 BODY | | STEEL COMP 316 STEM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE BODY | | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE STEM | | STYLE DESIGNATOR | STRAIGHT THRU | | FLOW CONTROL DEVICE | STEM | | MEDIA FOR WHICH DESIGNED | WATER-OIL-GAS SINGLE RESPONSE | | MAXIMUM OPERATING PRESSURE | 5000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | MAXIMUM OPERATING TEMP | 160.0 DEG FAHRENHEIT SINGLE RESPONSE | | VALVE OPERATION METHOD | MANUAL | | CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END | | THREADED INTERNAL BOSS 2ND END | | CONNECTION STYLE | FLARELESS (TUBE) 1ST END | | GASKET SEAL(BOSS) 2ND END | | SEAT ANGLE | 37.0 DEGREES 1ST END | | THREAD SERIES DESIGNATOR | UNJ 1ST END | | UNF 2ND END | | NOMINAL THREAD SIZE | 0.438 INCHES ALL ENDS | | THREAD QUANTITY PER INCH | 20 1ST END | | THREAD CLASS | 3A 1ST END | | 2B 2ND END | | THREAD DIRECTION | RIGHT-HAND ALL ENDS | | BONNET TYPE | INSIDE SCREW | | BONNET ATTACHMENT METHOD | THREADED | | MINIMUM OPERATING TEMP | -65.0 DEG FAHRENHEIT | | PART NAME ASSIGNED BY CONTROLLING AGENCY | GAGE VALVE |
|
|