|
|
|
National Stock Number:
4820-01-147-4105
Federal Supply Class:
4820
National Item Identification Number:
011474105
Description:
VALVE,ANGLE
Detail:
A valve with one inlet and one outlet connection with outlet flow at an angle to inlet flow. The flow is controlled by the action of a stem which lifts disks perpendicularly off the center axis of its seat. It may be inline or cartridge (manifold) design. Excludes VALVE (1), Y; VALVE, STOP-CHECK; and COCK, SHUTOFF, SCREW STEM.
|
Manufacturer Information:
| MNV-1K | 90526 | CLIPPARD INSTRUMENT LABORATORY INC |
|
Techincal Specification:
| BONNET ATTACHMENT METHOD | THREADED | | BONNET TYPE | INSIDE SCREW | | CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END | | CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END | | CONNECTION STYLE | FLARE(TUBE) 2ND END | | CONNECTION STYLE | PLAIN (TUBE) 1ST END | | FLOW CONTROL DEVICE | NEEDLE | | MATERIAL | COPPER ALLOY BODY | | MAXIMUM OPERATING TEMP | 230.0 FAHRENHEIT SINGLE RESPONSE | | MAXIMUM OPERATING PRESSURE | 2000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | MEDIA FOR WHICH DESIGNED | WATER-OIL-GAS SINGLE RESPONSE | | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.188 INCHES 2ND END | | NOMINAL THREAD SIZE | 0.188 INCHES ALL ENDS | | SPECIAL FEATURES | ADJUSTABLE CONTROL NEEDLE VALVE RESTRICTS FLOW IN BOTH DIRECTIONS | | STYLE DESIGNATOR | ANGLE | | THREAD CLASS | 2A 2ND END | | THREAD CLASS | 3B 1ST END | | THREAD DIRECTION | RIGHT-HAND ALL ENDS | | THREAD SERIES DESIGNATOR | UNF ALL ENDS | | VALVE OPERATION METHOD | MANUAL |
|
|