| CONNECTION TYPE | THREADED EXTERNAL TUBE ALL ENDS |
| CONNECTION STYLE | FLARELESS (TUBE) ALL ENDS |
| FLOW CONTROL DEVICE | POPPET |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/6 FED SPEC SINGLE MATERIAL RESPONSE FLOW CONTROL DEVICE |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/6 FED SPEC SINGLE MATERIAL RESPONSE BODY |
| MATERIAL | ALUMINUM ALLOY 2024 BODY |
| MATERIAL | ALUMINUM ALLOY 2024 FLOW CONTROL DEVICE |
| MAXIMUM OPERATING TEMP | 275.0 FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 140.0 POUNDS PER SQUARE INCH SINGLE RESPONSE |
| MEDIA FOR WHICH DESIGNED | OIL, HYDRAULIC SINGLE RESPONSE |
| NOMINAL THREAD SIZE | 0.438 INCHES 2ND END |
| NOMINAL THREAD SIZE | 0.562 INCHES 1ST END |
| OPENING PRESSURE SETTING | 120.0 POUNDS PER SQUARE INCH |
| SEAT ANGLE | 12.0 DEGREES ALL ENDS |
| STYLE DESIGNATOR | STRAIGHT THRU NOTE: TO BE USED FOR VALVE BODIES OF ONE SECTION ONLY. |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE 2 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | ANODIZE |
| THREAD DIRECTION | RIGHT-HAND ALL ENDS |
| THREAD CLASS | 3A ALL ENDS |
| THREAD SERIES DESIGNATOR | UNJF ALL ENDS |
| THREAD QUANTITY PER INCH | 18 1ST END |
| THREAD QUANTITY PER INCH | 20 2ND END |
| VALVE DISCHARGE FLOW RATE | 1.0 GALLONS PER MINUTE |
| VALVE OPERATION METHOD | AUTOMATIC |