| BOLT CIRCLE NOMINAL DIAMETER | 3.875 INCHES 1ST END |
| BOLT HOLE NOMINAL DIAMETER | 0.625 INCHES 1ST END |
| BOLT HOLE QUANTITY | 4 1ST END |
| BONNET ATTACHMENT METHOD | BOLTED |
| BONNET TYPE | OUTSIDE SCREW-YOKE |
| CONNECTION TYPE | FLANGE 1ST END |
| CONNECTION TYPE | THREADED EXTERNAL PIPE 2ND END |
| CONNECTION STYLE | PLAIN (PIPE) 2ND END |
| FEATURES PROVIDED | BONNET PACKING |
| FLANGE FACE DESIGN | PLAIN 1ST END |
| FLANGE SHAPE | ROUND WITH HOLES 1ST END |
| FLOW CONTROL DEVICE | DISK |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM B61 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM B62 ASSN STD SINGLE MATERIAL RESPONSE BODY |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM B61 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM B62 ASSN STD SINGLE MATERIAL RESPONSE FLOW CONTROL DEVICE |
| MATERIAL DOCUMENT AND CLASSIFICATION | STM B147,ALLOY 8A ASSN STD SINGLE MATERIAL RESPONSE STEM |
| MATERIAL | COPPER ALLOY 865 STEM |
| MATERIAL | COPPER ALLOY 922 OR COPPER ALLOY 836 BODY |
| MATERIAL | COPPER ALLOY 922 OR COPPER ALLOY 836 FLOW CONTROL DEVICE |
| MAXIMUM OPERATING PRESSURE | 150.0 POUNDS PER SQUARE INCH SINGLE RESPONSE |
| MEDIA FOR WHICH DESIGNED | STEAM 1ST RESPONSE |
| MEDIA FOR WHICH DESIGNED | WATER-OIL-GAS 2ND RESPONSE |
| NOMINAL OUTSIDE DIAMETER | 5.000 INCHES 1ST END |
| NOMINAL THICKNESS | 0.500 INCHES 1ST END |
| NOMINAL THREAD SIZE | 1.500 INCHES 2ND END |
| SPECIAL FEATURES | HOSE CAP AND CHAIN |
| STYLE DESIGNATOR | ANGLE |
| SUPPLEMENTARY FEATURES | THIS ITEM HAS BEEN REVIEWED FOR ASBESTOS MATERIAL. THE CURRENT APPROVED SOURCES 30263 HAS INDICATED THEIR PART NUMBER CONTAINED ASBESTOS PRIOR TO 1984. THEY CONTINUE TO MANUFACTURE THE SAME PART NUMBER WITHOUT ASBESTOS MATERIAL AFTER 1984 |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| THREAD SERIES DESIGNATOR | NPT 2ND END |
| VALVE OPERATION METHOD | MANUAL |