|
|
|
National Stock Number:
4820-01-290-6728
Federal Supply Class:
4820
National Item Identification Number:
012906728
Description:
VALVE,GLOBE
Detail:
A valve with one inlet and one outlet connection with outlet flow parallel to inlet flow. The flow is controlled by the action of a stem which lifts the disk perpendicularly off the center axis of its seat. The stem is at a 90 degree (1.5708 radians) angle to axis of flow. Excludes VALVE, STOP-CHECK; COCK, SHUTOFF, SCREW STEM; and VALVE, SOLENOID.
|
Manufacturer Information:
| 13217E1065-2 | 19204 | ARMY, UNITED STATES DEPARTMENT OF THE | | 2403X4 | 72216 | UNITED TECHNOLOGIES AUTOMOTIVE INC COMPONENTS DIV |
|
Techincal Specification:
| BONNET ATTACHMENT METHOD | THREADED | | BONNET TYPE | INSIDE SCREW | | CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END | | CONNECTION TYPE | THREADED INTERNAL PIPE 2ND END | | CONNECTION STYLE | FLARED (TUBE) 1ST END | | CONNECTION STYLE | PLAIN,OPTIONAL END(PIPE) 2ND END | | FLOW CONTROL DEVICE | NEEDLE | | MATERIAL | COPPER ALLOY BODY | | MATERIAL | ZINC OR STEEL CORROSION RESISTING STEM | | MAXIMUM OPERATING TEMP | 120.0 FAHRENHEIT SINGLE RESPONSE | | MAXIMUM OPERATING PRESSURE | 150.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | NOMINAL THREAD SIZE | 0.125 INCHES 2ND END | | NOMINAL THREAD SIZE | 0.438 INCHES 1ST END | | SEAT ANGLE | 45.0 DEGREES 1ST END | | STYLE DESIGNATOR | ANGLE | | THREAD CLASS | 3A 1ST END | | THREAD DIRECTION | RIGHT-HAND 1ST END | | THREAD DIRECTION | RIGHT-HAND 2ND END | | THREAD SERIES DESIGNATOR | NPTF 2ND END | | THREAD SERIES DESIGNATOR | UNF 1ST END | | VALVE OPERATION METHOD | MANUAL |
|
|