|
|
|
National Stock Number:
4820-01-305-3174
Federal Supply Class:
4820
National Item Identification Number:
013053174
Description:
VALVE,ANGLE
Detail:
A valve with one inlet and one outlet connection with outlet flow at an angle to inlet flow. The flow is controlled by the action of a stem which lifts disks perpendicularly off the center axis of its seat. It may be inline or cartridge (manifold) design. Excludes VALVE (1), Y; VALVE, STOP-CHECK; and COCK, SHUTOFF, SCREW STEM.
|
Manufacturer Information:
| MS17243 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS17243-7 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BONNET ATTACHMENT METHOD | THREADED | | BONNET TYPE | INSIDE SCREW | | CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END | | CONNECTION TYPE | UNTHREADED INTERNAL TUBE 2ND END | | CONNECTION STYLE | FLARED (TUBE) 1ST END | | CONNECTION STYLE | SOCKET (TUBE) 2ND END | | FLOW CONTROL DEVICE | PLUG | | MATERIAL | COPPER ALLOY OR STEEL BODY | | MAXIMUM OPERATING TEMP | 300.0 FAHRENHEIT SINGLE RESPONSE | | MAXIMUM OPERATING PRESSURE | 350.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.375 INCHES 2ND END | | NOMINAL THREAD SIZE | 0.375 INCHES 1ST END | | SEAT ANGLE | 12.5 DEGREES 1ST END | | STYLE DESIGNATOR | ANGLE | | THREAD DIRECTION | RIGHT-HAND 1ST END | | THREAD CLASS | 2A 1ST END | | THREAD SERIES DESIGNATOR | UNF 1ST END | | VALVE OPERATION METHOD | MANUAL |
|