| BONNET TYPE | INSIDE SCREW |
| BONNET ATTACHMENT METHOD | BOLTED |
| CONNECTION STYLE | PLAIN (PIPE) ALL ENDS |
| CONNECTION TYPE | THREADED EXTERNAL PIPE ALL ENDS |
| FLOW CONTROL DEVICE | DISK OR STEM |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-B-24480 MIL SPEC SINGLE MATERIAL RESPONSE BODY |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-281 CLASS B FED SPEC SINGLE MATERIAL RESPONSE SEAT |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE STEM |
| MATERIAL | COPPER ALLOY BODY |
| MATERIAL | NICKEL ALLOY R-405 SEAT |
| MATERIAL | RUBBER SYNTHETIC PACKING |
| MATERIAL | STEEL COMP 316 STEM |
| MAXIMUM OPERATING PRESSURE | 6000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE |
| MAXIMUM OPERATING TEMP | 230.0 FAHRENHEIT SINGLE RESPONSE |
| MEDIA FOR WHICH DESIGNED | WATER-OIL-GAS SINGLE RESPONSE |
| MINIMUM OPERATING TEMP | -20.0 FAHRENHEIT |
| NOMINAL PIPE SIZE ACCOMMODATED | 0.500 INCHES ALL ENDS |
| NOMINAL THREAD SIZE | 1.750 INCHES ALL ENDS |
| SPECIAL FEATURES | CENTERLINE OF VALVE STEM IS ANGLED APPROXIMATELY 12 DEGREES FROM THE PERPENDICULAR TO THE PIPING; VALVE IS VENTED BELOW THE SEAL |
| STYLE DESIGNATOR | STRAIGHT THRU |
| THREAD DIRECTION | RIGHT-HAND ALL ENDS |
| THREAD CLASS | 3A ALL ENDS |
| THREAD QUANTITY PER INCH | 12 ALL ENDS |
| THREAD SERIES DESIGNATOR | UN ALL ENDS |
| VALVE OPERATION METHOD | MANUAL |