|
|
|
National Stock Number:
4820-01-492-6053
Federal Supply Class:
4820
National Item Identification Number:
014926053
Description:
VALVE,SAFETY RELIEF
Detail:
A valve designed to automatically release excessive pressures. It is actuated by static pressure upstream of the valve and is used as a safety valve or relief valve, and may be set to close at a predetermined pressure. It is not designed for regulation of continuously fluctuating loads. It may be inline or cartridge (manifold) design. Excludes VALVE (1), RELIEF, PRESSURE AND TEMPERATURE.
|
Manufacturer Information:
| 7050 | 63600 | CURTISS-WRIGHT FLOW CONTROL CORPORATION | | 7050PL FIND NO 4 | 63600 | CURTISS-WRIGHT FLOW CONTROL CORPORATION | | CP2001B0AB100 | 63600 | CURTISS-WRIGHT FLOW CONTROL CORPORATION |
|
Techincal Specification:
| CONNECTION STYLE | PLAIN (PIPE) ALL ENDS | | FLOW CONTROL DEVICE | POPPET | | MATERIAL | STEEL OVERALL | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE | | NOMINAL PIPE SIZE ACCOMMODATED | 1.000 INCHES ALL ENDS | | NOMINAL THREAD SIZE | 0.875 INCHES ALL ENDS | | OPENING PRESSURE SETTING | 1000.0 POUNDS PER SQUARE INCH | | SPECIAL FEATURES | NEXT HIGHER ASSEMBLY 4820-01-492-5684, MANIFOLD VALVE ASSEMBLY. THIS VALVE DESIGNED FOR USE WITH GENERAL PURPOSE HYDRAULIC FLUID IAW MIL-H-5606, SAE NUMBER 10. SEAL MATERIAL IS BUNA-N. FLOW RATE IS 20.0 GPM. SIMILAR TO 4820-01-492-6232 WHICH HAS A FLOW RATE OF 10.0 GPM. BOTH USED ON SAME NHA AND END ITEM. | | STYLE DESIGNATOR | SCREW-IN CARTRIDGE | | THREAD CLASS | 2A ALL ENDS | | THREAD DIRECTION | RIGHT-HAND ALL ENDS | | THREAD SERIES DESIGNATOR | UNF ALL ENDS | | VALVE OPERATION METHOD | AUTOMATIC |
|
|