| DEPARTURE FROM CITED DOCUMENT | MODIFIED BY FLANGED END CONNECTIONS IAW ANSI B16.24 (150 LBS) |
| DISK LOADING METHOD | SPRING |
| ADJUSTABLE PRESSURE RANGE | +45.0/+75.0 POUNDS PER SQUARE INCH |
| BOLT CIRCLE NOMINAL DIAMETER | 4.750 INCHES ALL ENDS |
| BOLT HOLE NOMINAL DIAMETER | 0.625 INCHES ALL ENDS |
| BOLT HOLE QUANTITY | 4 ALL ENDS |
| BONNET TYPE | INSIDE SPRING |
| BONNET ATTACHMENT METHOD | THREADED |
| CONNECTION TYPE | FLANGE ALL ENDS |
| CONNECTION STYLE | PLAIN (TUBE) ERR-100 |
| FURNISHED ITEMS AND QUANTITY | 1 LEVER |
| FIRST CONNECTION FACE TO CENTERLINE DISTANCE | 4.700 INCHES |
| FLANGE FACE DESIGN | PLAIN ALL ENDS |
| FLANGE SHAPE | ROUND WITH HOLES ALL ENDS |
| FLOW CONTROL DEVICE | DISK |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 3660 ASSN STD SINGLE MATERIAL RESPONSE FLOW CONTROL DEVICE |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM B61 ASSN STD SINGLE MATERIAL RESPONSE BODY |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-288 FED SPEC SINGLE MATERIAL RESPONSE SEAT |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-281 FED SPEC SINGLE MATERIAL RESPONSE STEM |
| MATERIAL | COPPER ALLOY 922 BODY |
| MATERIAL | NICKEL ALLOY SEAT |
| MATERIAL | NICKEL ALLOY STEM |
| MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE FLOW CONTROL DEVICE |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | VALVE, ANGLE, RELIEF |
| PROPRIETARY CHARACTERISTICS | PACS |
| MAXIMUM OPERATING TEMP | 425.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 400.0 POUNDS PER SQUARE INCH SINGLE RESPONSE |
| MEDIA FOR WHICH DESIGNED | GAS, INERT SINGLE RESPONSE |
| NOMINAL OUTSIDE DIAMETER | 6.000 INCHES ALL ENDS |
| NOMINAL THICKNESS | 0.500 INCHES ALL ENDS |
| RENEWABLE SEAT RING TYPE | THREADED |
| SECOND CONNECTION FACE TO CENTERLINE DISTANCE | 4.700 INCHES |
| SPECIFICATION/STANDARD DATA | 81349-MIL-V-22549 GOVERNMENT SPECIFICATION |
| SPECIAL FEATURES | THE PRESSURE-TEMPERATURE RATING FOR THIS VALVE IS 400 PSI @ 200 DEGREES F, 200 PSI @ 425 DEGREES F. |
| VALVE OPERATION METHOD | AUTOMATIC OR MANUAL |
| VALVE SIZE | 2.000 INCHES |
| STYLE DESIGNATOR | ANGLE FLANGED ENDS |
| TEST DATA DOCUMENT | 81349-MIL-S-901C SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND 96906-MIL-STD-167-1 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |