|
|
|
National Stock Number:
4920-01-327-2490
Federal Supply Class:
4920
National Item Identification Number:
013272490
Description:
FIXTURE SET,AIRCRAFT MAINTENANCE
Detail:
A GROUP OF TWO OR MORE FIXTURE (1), AIRCRAFT MAINTENANCE. IT MAY ALSO INCLUDE ATTACHMENT HARDWARE, GASKETS, VALVES AND FITTINGS.
|
Manufacturer Information:
| 3C3647G01 | 66464 | GENERAL ELECTRIC CO |
|
Techincal Specification:
| FUNCTIONAL DESCRIPTION | USED TO ACCOMPLISH THE REPAIRS BY POSITIONING THE SHAFT,COVERING UNSPRAYED AREAS TO PREVENT OVERSPRAY AND PROVIDING FOR PLACEMENT OF TEST COUPONS TO MONITOR SPRAY PARAMETERS; USED FOR SEAL TEETH RESTORATION ON OUTER DIAMETER; IN ADDITION IT IS USED TO MASK THE SEAL TEETH DURING GRIT BLASTING - IN PREPARATION FOR THERMAL SPRAY | | PART NAME ASSIGNED BY CONTROLLING AGENCY | FIXTURE SET | | REFERENCE DATA AND LITERATURE | SERD NO. 1516A | | SPECIAL FEATURES | CONSISTS OF A STEEL BASE PLATE WITH A MACHINED PILOT RING THAT IS WELDED ONTO THE PLATE AND INTERFACES WITH THE INSIDE DIAMETER OF THE SHAFT; BASE PLATE HAS 2 PIN HOLES; A STAINLESS STEEL CONICAL SHAPED TUBE IS BOLTED TO A TOP PLATE; A LONG STUD WITH A PINNED KNOB; A STAINLESS STEEL ANGLE RING BOLTED TO THE BASE PLATE; TEST COUPONS LOCATED ON THE TOP OF THE FIXTURE; 2 FOUND BOND TEST BUTTONS WHICH ARE HELD IN PLACE BY 2 POLYTETRAFLUOROETHYLENE HOLDERS; FLAT PLATE COUPONS HELD IN PLACE BY 4 POLYTETRAFLUOROETHYLENE HOLDERS; THIS ITEM IS 14.700 INCH BY 14.700 INCH BY 5.000 INCH AND WEIGHS APPROXIMATELY 34 POUNDS |
|
|