| CENTER TO CENTER DISTANCE BETWEEN HOLES | 6.260 INCHES NOMINAL |
| CRITICALITY CODE JUSTIFICATION | AGAV |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.250 INCHES NOMINAL |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END TAPER LENGTH | 0.060 INCHES NOMINAL |
| FIRST HOLE DIAMETER | 0.171 INCHES MINIMUM AND 0.177 INCHES MAXIMUM |
| HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582, TYPE 303, COND A ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 303 OVERALL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT, LIFT MODULE - COLUMN BASE |
| PIN OVERALL DIAMETER | 1.0000 INCHES NOMINAL |
| PIN OVERALL LENGTH | 6.760 INCHES NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| SECOND HOLE DIAMETER | 0.171 INCHES MINIMUM AND 0.177 INCHES MAXIMUM |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASTM A967, TREATMENT NITRIC 1 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |