|
|
|
National Stock Number:
5305-00-245-5155
Federal Supply Class:
5305
National Item Identification Number:
002455155
Description:
SCREW ASSEMBLY,PANEL
Detail:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.
|
Manufacturer Information:
| CS6018TS3-17-B | 58998 | FASTENER INNOVATION TECHNOLOGY, INC. | | DLC7900-10B17 | 0HDW7 | HUCK INTERNATIONAL, INC. | | FT1166-10-2-17 | 58794 | FASTENER TECHNOLOGY CORP | | DLC7900-10B17 | 97928 | HUCK INTL INC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | FASTENER LENGTH | 0.828 INCHES MINIMUM AND 0.880 INCHES MAXIMUM | | HEAD DIAMETER | 0.393 INCHES MINIMUM AND 0.399 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) | | MATERIAL ACCOMMODATED THICKNESS | 0.090 INCHES MINIMUM AND 0.125 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM-A-493 ASSN STD SINGLE MATERIAL RESPONSE FASTENER | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE STAND-OFF | | MATERIAL | STEEL COMP 302 FASTENER | | MATERIAL | STEEL COMP 304 STAND-OFF | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.200 INCHES NOMINAL | | THREAD CLASS | 3A | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 32 |
|
|