5305-00-312-8087, SCREW,EXTERNALLY RELIEVED BODY

National Stock Number:
5305-00-312-8087

Federal Supply Class:
5305

National Item Identification Number:
003128087

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.

Manufacturer Information:

SMA147301-1	77221	PHAOSTRON INSTRUMENT AND ELECTRONIC COMPANY
SMA147301-1	80058	JOINT ELECTRONICS TYPE DESIGNATION SYSTEM

Techincal Specification:

DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	0.125 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER	0.469 INCHES NOMINAL
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	1
FASTENER LENGTH	0.844 INCHES NOMINAL
FIRST DIAMETER FROM HEAD	0.190 INCHES NOMINAL
HEAD HEIGHT	0.187 INCHES MAXIMUM
HEAD DIAMETER	0.437 INCHES MAXIMUM
HEAD STYLE	FLAT CHAMFER
INTERNAL DRIVE STYLE	SLOT
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP 1213 OVERALL
NOMINAL THREAD DIAMETER	0.190 INCHES
SECOND DIAMETER FROM HEAD	0.170 INCHES MINIMUM AND 0.175 INCHES MAXIMUM
SPECIAL FEATURES	0.035 TO 0.040 IN. DEEP O-RING RELIEF IN. HEAD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 2,CL 2 FED SPEC 1ST TREATMENT RESPONSE OR MIL-E-15090 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM AND CHROMATE OR ENAMEL OVERALL
THREAD DIRECTION	RIGHT-HAND
THREAD CLASS	2A
THREAD LENGTH	0.375 INCHES MINIMUM
THREAD SERIES DESIGNATOR	UNF
THREAD QUANTITY PER INCH	32

Click here to Register for Free 30-day Trial