|
|
|
National Stock Number:
5305-00-338-2091
Federal Supply Class:
5305
National Item Identification Number:
003382091
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| 53B334-59 | 06725 | SPS TECHNOLOGIES, LLC | | 53B334-59 | 0JRC1 | NORTHROP GRUMMAN TECHNICAL SERVICES, INC. | | 53B334-59 | 17446 | HUCK INTERNATIONAL, INC | | 53B334-59 | 27624 | SPS TECHNOLOGIES LLC | | 53B334-59 | 73197 | HI-SHEAR CORPORATION | | 53B334-59 | 76823 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 53B334-59 | 80539 | SPS TECHNOLOGIES, LLC | | 53B334-59 | 97928 | HUCK INTL INC | | 53B334-59 | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM | | FASTENER LENGTH | 4.157 INCHES MINIMUM AND 4.204 INCHES MAXIMUM | | GRIP DIAMETER | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM | | GRIP LENGTH | 3.678 INCHES MINIMUM AND 3.698 INCHES MAXIMUM | | HARDNESS RATING | 39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL | | HEAD DIAMETER | 0.451 INCHES MINIMUM AND 0.507 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) | | MATERIAL | STEEL COMP 4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OVERALL | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | SURFACE FINISH | 32.0 MICROINCHES GRIP | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3A | | THREAD LENGTH | 0.459 INCHES MINIMUM AND 0.526 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 28 |
|
|